Ariston SUPERLUX 15 PL 3100597 - Инструкция по эксплуатации - Страница 20

20

Start up

Start up the heater with its two-pole switch. In models with no switch, power up by turning the adjustment knob
clockwise. The indicator lamp only remains on when heating up. The thermostat will automatically disconnect the
resistance when the preset operating temperature is reached.

Setting the operating temperature

On models with external regulation, the water temperature can be set with the knob (

M 

fig. 7) connected to the

thermostat, as indicated on the device itself.

NEVER ATTEMPT TO REPAIR THE APPLIANCE YOURSELF - ALWAYS HAVE THIS DONE BY A
QUALIFIED TECHNICIAN.

The indicated data and specifications are not binding; the manufacturer reserves the right to modify them
at his own discretion notification or replacement.

This product is in conformity with REACH regulations.

Pursuant to Art. 26 of Italian Legislative Decree 14 march 2014, n. 49 "Enactment of Directive 2012/19/EU governing

electrical and electronic waste (WEEE)"

The barred bin symbol on the appliance and its packaging indicates that the product must be scrapped separately from other waste
at the end of its service life. The user must therefore hand the equipment over to a sorted waste disposal facility for electro-technical
and electronic equipment at the end of its service life.
Alternatively, he may return the equipment to the retailer at the time of purchase of a new equivalent type of appliance. Electronic
equipment of size less than 25 cm can be handed over to any electronics equipment retailer whose sales area is at least 400 m

2

 for

disposal free of charge and without any obligation to purchase new product.
Sorted waste collection for recycling, treatment and environmentally compatible scrapping contributes to the prevention of damage to
the environment and promotes reuse/recycling.

- Do not place anything under the water heater which may be damaged by a leak.
- If the water is not used for a long time:

➣

shut off power to the appliance by setting the external switch to "OFF";

➣

close the water circuit cocks.

- Water heated to over 50

°

C can cause immediate serious burns or even death. Children, disabled persons and the

aged are particularly at risk of burns.

Do not attempt to service or repair the appliance.

Recommendations

USEFUL HINTS

If the water delivery is cold, have the following checked:

- is there power to the thermostat and terminal block?
- are the heating elements working?

If the water is boiling hot (steam is coming out of the taps)

Shut off electrical power to the appliance and have the following checked:
- thermostat;
- the amount of scale on the boiler and heating element.

If the hot water delivery is insufficient, have the following checked:

- the mains water pressure;
- the condition of the deflector on the cold water intake pipe;
- the condition of the hot water pipe;
- the electrical equipment.

Water leaking from the overpressure safety device

It is normal that some water drip from the device while the water is being heated. To prevent this dripping, install an
expansion vessel on the delivery side. If the device continues leaking even while the water is not being heated, have
the following checked:
- the device's setting;
- the mains water pressure.

Caution: Never obstruct the device's outlet!

Operation, setting the operating temperature

EN