Sony CCD-TRV408E - Инструкция по эксплуатации - Страница 156

156

Ot h e r s

Sympt om

Cause and/ or Correct ive Act ions

• Your VCR and/or video camera recorder is not set correctly.

c

Make sure the input selector of the VCR is set to LINE. Also,
make sure the power switch of the video camera is set to

VTR/VCR (p. 103).

• The IR SETUP code or PAUSE MODE is not set correctly.

c

Select the correct IR SETUP code and PAUSE MODE,

according to your VCR. Then confirm VCR operation with

the IR TEST function. (p. 103, 104)

• The input selector on the VCR is not set correctly.

c

Set the selector correctly, and check the connection between

the VCR and your camcorder. (p. 111)

• The camcorder is connected to DV equipment other than of

Sony using the i.LINK cable (DV connecting cable).

c

Keep the connection, and follow the procedure on page 117.

• Setting programme on a blank portion of the tape is attempted.

c

Set the programme again on a recorded portion (p. 120).

• The synchronisation of your camcorder and the VCR is not

adjusted.

c

Adjust the synchronisation of the VCR (p. 118).

• Your camcorder was connected to your computer with the USB

cable before installing the USB driver, so the driver was not
recognised by the computer.

c

Uninstall the unrecognised driver, and then reinstall the

driver. (p. 127)

• The USB driver is not installed correctly.

c

Uninstall the unrecognised driver, and then reinstall the

driver. (p. 127)

• Your computer’s operating system is Windows 98 or earlier.
• The USB cable was not connected before starting up the

application software.

c

Connect the USB cable before starting up the application

software.  (p. 130)

• COMMANDER is set to OFF in the menu settings.

c

Set it to ON. (p. 143)

• Something is blocking the infrared rays.

c

Remove the obstacle.

• The batteries are inserted in the battery holder with the

+ – polarities incorrectly matching the + – marks.

c

Insert the batteries with the correct polarity. (p. 198)

• The batteries are dead.

c

Insert new ones. (p. 198)

*

1)

CCD-TRV107E/TRV108E/TRV208E/TRV408E only

*

2)

DCR-TRV140E only

*

3)

CCD-TRV107E/TRV208E/TRV408E, DCR-TRV140E only

Ty p e s o f  t r o u b l e  a n d  t h e i r  so l u t i o n s

The Remote Commander supplied

with your camcorder does not

work.*

3)

Digital program editing does not

function.*

2)

You cannot install the USB driver.*

2)

Easy Dubbing does not function.*

1)

USB Streaming function does not

work.*

2)