Fulgor Milano FCLH 9008 ID WT BK - Инструкция по эксплуатации - Страница 35

EN

13

The active timer can also be adjusted or stopped by selecting 

the cooking zone and re-entering the timer menu. After the 

counter has expired, audible feedback and visual feedback 

(flashing “00:00:00”) is provided. The acoustic feedback ends 

after 2 min. or by touching a random key.

Pause and Call up function

Activating the Pause function:

When at least one cooking zone is in operation, the pause 

function can be activated. To activate the pause function, press 

the “||” symbol on the display.

The pause condition can also be activated with cooking zone 

specific errors - here the error display is hidden. The indication 

of residual heat and special messages are also hidden; the 

pause display has priority.

While the Pause function is active:

While the pause function is active, no power will be supplied 

to any cooking zone. All system states will be maintained 

throughout the pause. After the pause, the timeout counters 

will be restarted for the cooking zones without pans detected 

(max. 10 min). Any timers (including the egg timer) set before 

the pause will be interrupted during the pause and continue 

upon exiting pause mode.

When the pause mode is activated, a selected booster or 

automatic boil function is ended.

The residual heat calculation and the maximum operating time 

limitations will not be interrupted and will continue to run in the 

background.

Pause mode can only be activated for a maximum of 10 min. 

If the pause mode is not deactivated within 10 min, the hob 

switches off automatically. During the pause time it is possible 

to use the on/off button to turn off the control. In this case, the 

pause mode is also deactivated.

Deactivating the pause mode:

To deactivate the pause mode, press the position indicated on 

the slider. This will reactivate the state prior to activation of the 

pause.

Call up function: 

If the control has been accidentally turned off via the main 

switch, all the settings can be restored using the call up function.

After turning off the control from the main switch, the user has 

6 seconds to turn the control back on and then the settings will 

be reset automatically. The call up function can only be used if 

at least one cooking zone was active (cooking level> 0).

Settings restored:

• Cooking levels of all the cooking zones.
• Minutes and Seconds of the timers relating to the active 

cooking zone.

• Automatic heating time and booster function.
• Child lock state.

Time lock 20 seconds

To activate the time lock function, it is necessary to briefly press 

the 20 sec button.

While the time lock is active, the following message is displayed 

and the remaining time is counted down.

General hob settings

The user can adjust the general settings of the hob. These 

settings persist even after the hob is switched off. 

It is possible to adjust the following settings:
• Language selection
• Display brightness
• Volume control

To access the settings menu, press the button on the right.