Триммеры KRONWERK KC-2500 96212 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

9
GASOLINE TRIMMER
Starting the trimmer
fig. 10
fig. 11
• Pour the fuel mixture into the fuel tank.
• Press the rubber cap of the manual fuel pump fi ve to seven
times to fi ll the carburetor with the fuel mixture (fi g. 10). At the
same time, the pumped fuel mixture must be viewed through
the rubber cap of the manual fuel pump knob. If the fuel mixture
does not fi ll the cap, press the manual fuel pump knob several
times.
• Move the air valve lever upwards to position |/| (fi g. 11). Turn the
switch on the control lever to the "On" position (fi g. 14).
• Press the gas throttle lever on the control lever and secure it
with the retainer (fi g. 13).
• While holding the trimmer, pull the handle of the starter until it "ignites". Quickly pull the starter handle.
Repeat these steps until the engine starts (fi g. 12).
fig. 13
• Move the air valve lever downwards, then press the gas
throttle lever to unlock it (fi g. 13).
• Smoothly press the gas throttle lever, bringing the engine to
its maximum speed and start operating the unit (fi g. 14). To
mow, hold the trimmer fi rmly with both hands on the handles.
• If the engine is warm, turn on the trimmer and follow the same
procedure as for the cold start but without using the pump. The
air valve shall be in the lower position.
WARNING!
Before starting the engine, make sure the machine's workpiece is not in contact with foreign
bodies.
fig. 12
ATTENTION!
Starting the engine is forbidden without fi rst pulling the starter cord! Strong jerks of
the unstrung cord and pulling the cord up to the stop may cause damage to the starter
mechanism.
Содержание
- 15 СОДЕРЖ АНИЕ
- 16 НАЗНАЧЕНИЕ; УСТРОЙСТВО
- 17 КОМПЛЕК ТНОСТЬ
- 18 ТЕХНИЧЕСКИЕ ХАРАК ТЕРИСТИКИ; Соединение штанги и двигателя; Установка рукоятки
- 19 Установка защитного кожуха; Соединение троса дроссельной заслонки; Установка плечевого ремня
- 20 Установка катушки с леской; УК АЗАНИЯ ПО ЭКСЛУАТАЦИИ; Приготовление топливной смеси; Хранить режущий нож в месте, недоступном для детей!
- 21 Запуск триммера
- 22 Остановка триммера; ТЕХНИЧЕСКОЕ ОБСЛУ ЖИВАНИЕ; Система охлаждения; Перед заправкой топливом двигатель должен остыть.
- 23 ВОЗМОЖНЫЕ НЕИСПРАВНОСТИ И СПОСОБЫ ИХ УСТРАНЕНИЯ
- 24 ХРАНЕНИЕ; РЕАЛИЗАЦИЯ И У ТИЛИЗАЦИЯ