Триммеры KRONWERK KC-2500 96212 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

11
GASOLINE TRIMMER
Regularly clean the cylinder gills from dirt using a brush and/or compressed air.
fig. 17
fig. 18
4. Exhaust pipe
Periodically clean the engine exhaust spark arrestor (fi g. 17). The contaminated spark arrestor may adversely
aff ect engine power and mowing quality.
5. Gearbox
Once every three months, check for the presence of oil in the gearbox (fi g. 18). If necessary, replace the oil or
contact an authorized service center.
TROUBLESHOOTING
Fault
Cause
Solution
The engine does not
start.
The ignition switch is in the "Off " position
(off ).
Turn the ignition switch in the direction
opposite to the indicated arrow on the
control lever.
Empty fuel tank.
Add fresh fuel mixture in the fuel tank.
The rubber cap of the manual fuel pump is
pressed.
Fully push the rubber cap of the manual fuel
pump 5-7 times
The carburettor is pouring fuel (because of
an incorrect starting order).
Repeat the start-up procedure by setting the
carburettor air valve control lever to position
1 ("Fully open").
An old or improperly prepared fuel mixture.
Drain the fuel mixture from the fuel tank.
Add fresh fuel mixture.
Damaged spark plug.
Clean or replace the spark plug.
The engine is unstable
running at idle.
Dirty air fi lter.
Clean or replace the air fi lter.
An old or improperly prepared fuel mixture.
Drain the fuel mixture from the fuel tank.
Add fresh fuel mixture.
The engine does not
gain momentum.
An old or improperly prepared fu el mixture.
Drain the fuel mixture from the fuel tank.
Add fresh fuel mixture.
The engine does not
reach the required
power.
The working tool is blocked by foreign
objects.
Stop the engine and clean the working tool.
Dirty air fi lter.
Clean or replace the air fi lter.
An old or improperly prepared fuel mixture.
Drain the fuel mixture from the fuel tank.
Add fresh fuel mixture.
Содержание
- 15 СОДЕРЖ АНИЕ
- 16 НАЗНАЧЕНИЕ; УСТРОЙСТВО
- 17 КОМПЛЕК ТНОСТЬ
- 18 ТЕХНИЧЕСКИЕ ХАРАК ТЕРИСТИКИ; Соединение штанги и двигателя; Установка рукоятки
- 19 Установка защитного кожуха; Соединение троса дроссельной заслонки; Установка плечевого ремня
- 20 Установка катушки с леской; УК АЗАНИЯ ПО ЭКСЛУАТАЦИИ; Приготовление топливной смеси; Хранить режущий нож в месте, недоступном для детей!
- 21 Запуск триммера
- 22 Остановка триммера; ТЕХНИЧЕСКОЕ ОБСЛУ ЖИВАНИЕ; Система охлаждения; Перед заправкой топливом двигатель должен остыть.
- 23 ВОЗМОЖНЫЕ НЕИСПРАВНОСТИ И СПОСОБЫ ИХ УСТРАНЕНИЯ
- 24 ХРАНЕНИЕ; РЕАЛИЗАЦИЯ И У ТИЛИЗАЦИЯ