Einhell GE-BC 33 AS - Инструкция по эксплуатации - Страница 29

GB

- 29 -

Putting the equipment back into operation

1.  Remove the spark plug (see section 9.4).

2.  Quickly tug on the starter cord to remove ex-

cess oil from the combustion chamber.

3.  Clean the spark plug and check that the 

electrode gap is correct, or insert a new spark 

plug with the correct electrode gap.

4.  Prepare the equipment for operation.

5.  Fill the tank with the relevant mixture of fuel 

and oil. See the section „Fuel and oil“.

10.3 Transport

To transport the machine, empty the petrol tank 

as described in section 10. Clean coarse dirt o

ff

the equipment with a brush or hand brush. Dis-

mantle the drive rod mechanism as described in 

section 5.2.

10.4 Ordering spare parts

Please provide the following information on all 

orders for spare parts:

• 

Model/type of the equipment

• 

Article number of the equipment

• 

ID number of the equipment

• 

Part number of the required spare part

For our latest prices and information please go to 

www.isc-gmbh.info

11. Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw 

materials in this packaging can be reused or 

recycled. The equipment and its accessories are 

made of various types of material, such as metal 

and plastic. Defective components must be dispo-

sed of as special waste. Ask your dealer or your 

local council.

Anl_GE_BC_33_AS_SPK1.indb   29

Anl_GE_BC_33_AS_SPK1.indb   29

15.10.13   11:56

15.10.13   11:56