Einhell GE-BC 33 AS - Инструкция по эксплуатации - Страница 22

GB

- 22 -



 Important!

 When using the equipment, a few safety pre-

cautions must be observed to avoid injuries and 

damage. Please read the complete operating 

instructions and safety regulations with due care. 

Keep this manual in a safe place, so that the in-

formation is available at all times. If you give the 

equipment to any other person, hand over these 

operating instructions and safety regulations as 

well. We cannot accept any liability for damage 

or accidents which arise due to a failure to follow 

these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be 

found in the enclosed booklet.



  Caution!

Read all safety regulations and instructions.

Any errors made in following the safety regula-

tions and instructions may result in an electric 

shock, 

fi

 re and/or serious injury.

Keep all safety regulations and instructions 

in a safe place for future use.

Safety devices

When working with the equipment, the appropri-

ate plastic guard hood for cutting blade mode or 

cutting line mode must be 

fi

 tted to prevent objects 

being thrown out by the equipment. The integra-

ted blade in the cutting line guard hood automati-

cally cuts the line to the optimum length.

Explanation of the warning signs on the 

equipment (Fig. 42):

1. Warning!

2.  Read the directions for use before operating 

the equipment.

3.  Wear protective headgear, goggles and ear 

mu

ff

 s.

4.  Wear sturdy, non-slip footwear.

5.  Wear safety gloves.

6.  Protect the equipment from rain and damp.

7.  Be careful of objects being thrown out!

8.  Always switch o

ff

  the equipment and pull out 

the spark boot plug before carrying out any 

maintenance work.

9.  All bystanders must be kept at least 15 m 

from the machine.

10.  The equipment continues to rotate!

11.  Caution: Hot equipment parts. Keep your dis-

tance.

12.  Add a little grease (gear grease) after every 

20 hours in operation!

13.  Beware of recoil!

14.  Do not use any saw blades.

2.  Layout and items supplied

2.1 Layout

1.   Cutting blade

2a.  Cutting blade guard hood

2b.  Guard hood screw (1x)

2c.  Cutting line guard hood

3.   Line spool with cutting line

4.   Drive rod mechanism

5.   Connecting piece

6.   Gearing

7.   Eyelet

8.   Handle

9.   On/O

ff

  switch

10.  Handle screw

11.  Throttle lock

12.  Throttle lever

13.  Spark plug connector

14.  Starter cable

15.  Petrol tank / cap

16.  Air 

fi

 lter housing cover

17.  Choke lever

18.  Clip

19.  Screw

20.  Clip

21.  Screwdriver

22.  Allen key size 4mm

23.  Allen key size 5mm

24.  Nut M10 (left-hand thread)

25.  Harness

26.  Oil/petrol mixing bottle

27.  Multifunction tool

28.  Lubricating point

29.  Fuel pump „primer“

30.  Carrier plate

31.  Pressure plate

32.  Pressure plate cover

2.2 Items supplied

Please check that the article is complete as 

speci

fi

 ed in the scope of delivery. If parts are 

missing, please contact our service center or the 

sales outlet where you made your purchase at 

the latest within 5 working days after purchasing 

the product and upon presentation of a valid bill 

of purchase. Also, refer to the warranty table in 

the service information at the end of the operating 

instructions.

Anl_GE_BC_33_AS_SPK1.indb   22

Anl_GE_BC_33_AS_SPK1.indb   22

15.10.13   11:56

15.10.13   11:56