Toshiba 43UA2063DG - Инструкция по эксплуатации - Страница 6

English

   - 5 -

Stand Installation & 

Wall Mounting

Assembling / Removing the pedestal
Preparations

Take out the pedestal(s) and the TV from the packing 

case and put the TV onto a work table with the screen 

panel down on the clean and soft cloth (blanket, etc.)

•  Use a flat and firm table bigger than the TV.
• 

Do not hold the screen panel part.

• 

Make sure not to scratch or break the TV.

Assembling the pedestal
1. 

Place the stand(s) on the stand mounting 

pattern(s) on the rear side of the TV. 

2. 

Insert the screws provided and tighten them gently 

until the stand is properly fitted.

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way 

when using the wall-hanging bracket or repacking 

the TV.

• 

Put the TV onto a work table with the screen panel 

down on the clean and soft cloth. Leave the stand(s) 

protruding over the edge of the surface.

•  Unscrew the screws that fixing the stand(s).
• 

Remove the stand(s).

When using the wall mount bracket

Your TV is also prepared for a VESA-compliant wall 

mount bracket. If it is not supplied with your TV, contact 

your local dealer to purchase the recommended wall-

hanging bracket.

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL 

INPUT (ANT) socket or satellite plug to the SATELLITE 

INPUT (LNB) socket located on the rear side of the TV.

Rear side of the TV

1

2

LNB

ANT

1. 

Satellite

2. 

Aerial or cable

 If you want to connect a device to the TV, make 

sure that both the TV and the device are turned off 

before making any connection. After the connection 

is done, you can turn on the units and use them.