Toshiba 43UA2063DG - Инструкция по эксплуатации - Страница 25

English

   - 24 -

format your Disk and specify the storage space that 

will be used for timeshift function. When the setup is 

completed result will be displayed. Press 

Exit

 button.

Timeshift function will not be available for radio 

broadcasts.

Disk Format

W h e n   u s i n g   a   n e w   U S B   s t o r a g e   d e v i c e ,   i t   i s 

recommended that you first format it using the 

Format 

option in the 

Record>Device Info

 menu in Live TV 

mode. Highlight the connected device on the 

Device 

Info

 screen and press 

OK

 or Right directional button 

to see the list of available options. Then highlight 

Format

 and press 

OK

  to  proceed.  A  confirmation 

dialogue will be displayed. Highlight 

Yes

 and press 

OK

 to start formatting.

IMPORTANT:

 Formatting your USB storage device 

will erase ALL the data on it and it’s file system will be 

converted to FAT32. In most cases operation errors will 

be fixed after a format but you will lose ALL your data.

Schedule List

You can add reminders or record timers using the 

Schedule List

 menu. You can access the 

Schedule 

List

 from the 

Record

 menu in Live TV mode. Highlight 

Schedule List

 and press 

OK

. Previously set timers 

will be listed if any available. 
Press 

Record 

button to add a timer while the 

Schedule 

List

 menu is displayed on the screen. You can 

define the type of the timer by setting the 

Schedule 

Type

 option as 

Reminder

 or 

Record

. When other 

parameters are set highlight 

Add

 and press 

OK

. The 

timer will be added to the list.
If any available, you can also edit or delete the timers 

on this list. Highlight the timer of your choice and press 

OK

. 

Edit

 and 

Delete

 options will appear at the bottom 

of the screen. Highlight the desired option and press 

OK

. After you edited a timer you can choose either 

to replace it or add it as a new timer. If you choose 

the Replace option, the timer will be saved with the 

new settings. If you choose the 

Add

 option, the timer 

will be added to the list as a new timer. Highlight 

Replace

 or 

Add

 according to your preference and 

press 

OK

 to proceed. When you choose to delete 

a  timer  a  confirmation  dialogue  will  be  displayed  on 

the screen. Highlight 

Yes

 and press 

OK

 to delete the 

selected timer.
A warning message will be displayed if the time 

intervals of two timers overlap. You can not set more 

than one timer for the same time interval.
Press 

EXIT

 button to close the Schedule List.

CEC

With CEC function of your TV you can operate a 

connected device with the TV remote control. This 

function uses HDMI CEC (Consumer Electronics 

Control) to communicate with the connected devices. 

Devices must support HDMI CEC and must be 

connected with an HDMI connection.
The TV comes CEC function switched on. Make 

sure that all CEC settings are properly set up on the 

connected CEC device. The CEC functionality has 

different  names  on  different  brands.  CEC  function 

might not work with all devices. If you connect a device 

with HDMI CEC support to your TV, the related HDMI 

input source will be renamed with the connected 

device's name.
To operate the connected CEC device, select the 

related HDMI input source from the 

Inputs

 menu on 

the Home Screen. Or press the 

Source

 button if the TV 

is in Live TV mode and select the related HDMI input 

source from the list. To terminate this operation and 

control the TV via the remote again, press the 

Source

button, which will still be functional, on the remote and 

switch to another source.
The TV remote is automatically able to control the 

device once the connected HDMI source has been 

selected. However not all buttons will be forwarded 

to the device. Only devices that support CEC Remote 

Control function will respond to the TV remote control.
The TV supports also ARC(Audio Return Channel) 

feature. This feature is an audio link meant to replace 

other cables between the TV and the audio system 

(A/V receiver or speaker system). Connect the audio 

system to the HDMI2 input on the TV to enable ARC 

feature.
In order to activate ARC feature the 

Speakers

 option 

should be set as 

External Audio System

. You can 

access this option from the 

TV options

 or 

TV options>-

Settings>Device Preferences>Sound

 menu in Live TV 

mode or from 

Settings>Device Preferences>Sound

menu on the Home Screen. When ARC is active, TV will 

mute its other audio outputs automatically. So you will 

hear audio from connected audio device only (same 

as other optical or co-axial digital audio outputs). The 

volume control buttons of the remote will be directed 

to connected audio device and you will be able to 

control the volume of the connected device with your 

TV remote.

Note:

 ARC is supported only via the HDMI2 input.

The CEC functions are set to 

On

 by default. To switch 

off completely do the following:

1 - Enter the 

Settings>Device

Preferences>Inputs 

menu on the Home Screen or 

TV options>Set-

tings>Device Preferences>Inputs

 menu in Live TV 

mode.