Toshiba 43UA2063DG - Инструкция по эксплуатации - Страница 17

English

   - 16 -

depending on the operator and the 

Scan Mode 

se-

lections. Set the 

Scan Mode

 as 

Full

 if you don’t know 

how to set up other options. Highlight 

Scan

 and press 

OK

 to start the scan. You can press the 

Back

 button to 

cancel the scan. The channels that have already been 

found will be stored in the channel list.

Single RF Scan: 

Enter the 

Frequency 

value.

 Signal 

Level

 and 

Signal Quality

 of the selected 

Frequency

will be shown. Highlight

the 

Scan

 option and press 

OK

 to start scan. The found channels will be stored 

in the channel list.

LCN:

 Set your preference for LCN. LCN is the Logical 

Channel Number system that organizes available 

broadcasts in accordance with a recognizable channel 

number sequence (if available).

Channel Scan Type:

 Set your scan type preference. 

Channel Store Type: 

Set your store type preference. 

Favorite Network Select:

 Select your favourite net-

work. This menu option will be active, if more than only 

one network is available.

Channel Skip:

 Set channels to be skipped when 

switching the channels via 

Programme +/-

 buttons 

on the remote. Highlight the desired channel/s on the 

list and press 

OK

 to select/unselect.

Channel Sort:

 Replace the positions of the two 

selected channels in the channel list. Highlight the 

desired channels on the list and press 

OK

 to select. 

When the second channel is selected, the position of 

this channel will be replaced with the position of the 

first selected channel.

Channel Move:

 Move a channel to the position of 

another channel. Highlight the channel you want to 

move and press 

OK

 to select. Then do the same for a 

second channel. When the second channel is selected, 

the first selected channel will be moved to the position 

of that channel.

Channel Edit:

 Edit channels in the channel list. Edit 

the name and channel number of the selected channel 

and display 

Network Name

, 

Frequency

, 

Color Sys-

tem

, 

Sound System, Modulation 

and 

Symbol Rate

informations related to that channel. Depending on the 

channel other options may also be editable. You can 

press the 

Blue

 button to delete the highlighted channel.

Analog Channel Fine-tune:

  Fine-tune an analogue 

channel. A list of available analogue channels will be 

displayed. Select the desired one from the list and 

press 

OK

 button. Then change the frequency of the 

channel by pressing Left/Right directional buttons. 

Press 

OK

 to store the new frequency for that channel. 

Press 

Back

 to cancel. This item may not be visible, 

depending on whether or not the last watched channel 

was analogue.

Clear Channel List:

 Delete all channels stored in the 

channel list of the selected channel installation mode. 

A dialogue will be displayed for confirmation. Highlight 

OK

 and press 

OK

 button to proceed. Highlight 

Cancel

and press 

OK

 to cancel.

Channel Installation Mode - Preferred/General 

Satellite/Satellite

Satellite Re-scan: 

Start a satellite scan beginning 

with the operator selection screen for the 

Preferred 

Satellite

 channel installation mode or with the satellite 

selection screen for the 

General Satellite 

or

 Satellite

channel installation mode. When this scanning option 

is preferred, some scanning configurations will not be 

available and thus the preferences you made during 

the initial setup process may not be changed.

Satellite Add: 

Add satellite and perform a satellite 

scan.

Satellite Update: 

Search for any updates by repeating 

the previous scan with the same settings. You will also 

be able to configure these settings before the scan.

 If 

Channel Installation

Mode

 is set to 

Preferred Satel-

lite

 this option may be named differently depending on 

the available services. Highlight the satellite and press 

OK

 button to configure detailed satellite parameters. 

Press the 

Right

 directional button to proceed.

Satellite Manual Tuning:

 Start a manual satellite scan.

Favorite Network Select: 

Select your favourite 

network. This menu option will be active, if more than 

only one network is available. This option may not be 

available depending on the selected country during 

the initial setup process.

Channel Skip: 

Set channels to be skipped when 

switching the channels via 

Program +/-

 buttons on 

the remote. Highlight the desired channel/s on the list 

and press 

OK

 to select/unselect.

Channel Sort:

 Replace the positions of the two 

selected channels in the channel list. Highlight the 

desired channels on the list and press 

OK

 to select. 

When the second channel is selected, the position of 

this channel will be replaced with the position of the 

first selected channel.

Channel Move:

 Move a channel to the position of 

another channel. Highlight the channel you want to 

move and press 

OK

 to select. Then do the same for a 

second channel. When the second channel is selected, 

the first selected channel will be moved to the position 

of that channel.

Channel Edit:

 Edit channels in the channel list. Edit 

the name and channel number of the selected channel 

and display 

Network Name

, 

Frequency

, 

Color Sys-

tem

 and 

Sound System 

informations related to that 

channel if available. Depending on the channel other 

options may also be editable. You can press the 

Blue

button to delete the highlighted channel.

Clear Channel List:

 Delete all channels stored in the 

channel list of the selected channel installation mode.