Makita DRC 200 Z - Инструкция по эксплуатации - Страница 18

18 ENGLISH

The suction power 

is not strong 

enough to capture 

dust and dirt.

  Empty the dust box and clean the 

filter.

  Press the   Vacuum button on the 

Robotic Cleaner or on the remote 

control to turn ON the vacuum fan.

The side brushes 

fall off.

  Install the side brushes correctly 

(Fig. A).

The side brushes 

do not rotate 

or rotate with 

difficulty.

  Clean the side brushes and the main 

brush.

  Install the main brush and the plate 

correctly (Fig. N).

The exhaust air 

smells.

  Empty the dust box and clean the 

filter.

The remote control 

does not work.

  Install the remote control batteries 

correctly (Fig. E).

  Replace the batteries with new ones.

  Press the   POWER button on the 

Robotic Cleaner to turn it ON.

  Move closer to the Robotic Cleaner 

or remove obstacles between the 

Robotic Cleaner and the remote 

control.

  Stop using the Robotic Cleaner near 

or move it away from equipment that 

uses radio frequencies in the 2.4 GHz 

band (kitchen microwaves, Bluetooth 

devices, Wi-Fi devices, etc.).

  Turn the Robotic Cleaner OFF and 

then ON.

The auto-on timer 

does not work.

  Use fully charged battery cartridges.

  Reactivate the auto-on timer.

OPTIONAL 

ACCESSORIES

CAUTION: These accessories or attachments are 

recommended for use with your Makita tool specified 

in this manual. The use of any other accessories or 

attachments might present a risk of injury to persons. 

Only use the accessory or attachment for its stated 

purpose.

•  Boundary tape
•  Side brush
•  Main brush
•  Bottom plate
• Filter
•  Makita genuine battery and charger

NOTE: Some items in the list may be included in the 

tool package as standard accessories. They may 

differ from country to country.

REFERENCE 

INFORMATION

Makita Corporation and its subsidiaries, affiliates, and 

distributors may use Usage Information for the purpose 

of after-sales services such as maintenance and repair. 

Usage Information consists of number of operations, 

distribution load, error information, operational status, 

and/or maintenance record of the power tool.