Bertazzoni PRO90 6 MFE S XT - Инструкция по эксплуатации - Страница 17

17 

INDUCTION 

Fig 17                                                                                                    

Functions 

1…9 :   

Power Level 

     P : 

  Booster  

     A :   

Heating Accelerator 

Hob control knob 

These knobs provide control of the ceramic hob's cooking zones. 

The zone it controls is shown above each knob. Turn the knob to the right to set the 
zone's operating power; the settings range from a minimum of 1 to a maximum of 9.  
The working power is shown by a display on the hob. 

Heating accelerator 

Each cooking zone is equipped with a heating accelerator. 

This system allows the zone to be operated at peak power for a time proportional to 
the heating power selected. 
To start the heating accelerator, turn the knob to the left, select setting "A" and then 
release. The letter "A" will appear on the display on the hob. 
You now have 3 seconds to select the heating setting of your choice. Once a setting 
between 1 and 9 has been selected, "A" and the chosen setting will flash in 
alternation on the display. ' 
While the heating accelerator is in operation, the heating level can be increased at 
any time. The "full power" time will be modified accordingly. If the power is reduced 
by turning the knob anticlockwise, option "A" is automatically deactivated. 

Power Function  

The power function allows the user to operate each heating zone continuously at the  

maximum power for a time of no more than 10 minutes. This function can be used,  

for example, to bring a large amount of water to the boil in a hurry, or to turn up the  

   heat 

under 

meat. 

Turn the knob clockwise and set heating level 9, then use the knob to set the "P" 
position and release it. "P" appears on the corresponding zone display. 
After 10 minutes, the power is reduced automatically, the knob returns to the 9 
setting and the "P" disappears. 
However, the power function can be turned ott at any time by reducing the heating 
level. . 
When the power function is selected for one heating zone (e.g. the left front zone), 
the power absorbed by the second zone (Ieft rear zone) might be reduced to supply 
the maximum available energy to the first zone. 
Consequently, the power function takes priority over the heating accelerator. 
If a pan is removed from the cooking zone while the power function is on, the 
function is switched off. 

HOB 

ATTENTION: 

Metal items such as cutlery or lids must never be placed on the surface of the hob since they may become 
hot. 

Cooking zones   

The appliance is equipped with 5 cooking zones having different diameters and   

powers. Their positions are clearly marked by rings, while the heating power is only