Kaiser HGG 5501 W - Инструкция по эксплуатации - Страница 12

12 

 EN 

1

2 

3

ADJUSTMENT TO DIFFERENT GAS TYPES 

 
The cookers are supplied with gas burners which the 
manufacturer has adjusted to natural gas used in 
your country. The type of gas is specified on the data 
plate as well as in the warranty of quality. The data 
plate is to find on the base or on the back of the 

ɫ

ooker. 

 
To adjust gas burners, remove knobs of the gas 
burners. 
To adjust the gas burners of the oven, withdraw the 
bottom of the oven cavity. 
To adjust the cooker to another type of gas: 

x

 replace a nozzle (see table 1), 

x

 adjust  the lowerer pressure of the valves 

x

 adjust air supply to the gas burners of the oven. 

1

 – To replace the nozzle: screw out the nozzle (use 

screw tip N° 7) and replace it with another one in 
compliance with the available type of gas (see the 
table 1). 

2

 – To adjust the burners: Switch on gas and select 

“Sparing flame”. For adjustment, use a 2,5 mm-screw 
tip. 
 

3

 – To replace the nozzle in the oven: See table 1 “a” 

to adjust air supply correctly. 
 
Table 1 

Type of 

gas 

Burner: type / diameter 

«

ɚ

» 

Small Normal

Big

Oven

Natural gas

0,75 1,09  1,24 1,3

3 

Liquid gas 

0,52 0,67  0,84 

0,84 10 

Gas 

supply 

Adjusting from liquid 

gas to natural gas 

Adjusting from natural 

gas to liquid gas 

Full  

flame 

Nozzle burner 1 

Replace in compliance 

with Table 1 

Nozzle burners 1 

Replace in compliance 

with Table 1 

Saving 

flame 

Regulating

 needle 2 

Screw out slightly and 

adjust the flame size 

Adjusting needle 2  

Screw in against the 

stop and check up gas 

supply 

Attention!

  (A hint for the serviceman) The 

adjustment of the cooker to another gas type 
should be registered at the connection 
place.  
Issue and attach a label with the gas type 
which the cooker has been adjusted to.