Electrolux EKK 61500 OX - Инструкция по эксплуатации - Страница 25

13.5 

Adjustment to different

types of gas

WARNING!

Let only an authorized person do
the adjustment to different types
of gas.

This appliance is for operation
with natural gas.
With the correct injectors, you can
also operate it with liquid gas.

WARNING!

Before replacing the injectors,
make sure that the gas knobs are
in the Off position and disconnect
the appliance from the electrical
supply. Let the appliance cool off
fully. There is a risk of injury.

13.6 

Injectors replacement

1.

Remove the pan supports.

2.

Remove the caps and crowns of the
burner.

3.

With a socket spanner 7 remove the
injectors and replace them with the
ones which are necessary for the type
of gas you use.

4.

Assemble the parts, follow the same
procedure backwards.

5.

Replace the rating plate (it is near the
gas supply pipe) with the one for the
new type of gas supply. You can find
this plate in the package supplied
with the appliance.

If the supply gas pressure is changeable
or different from the necessary pressure,
you must fit an applicable pressure ad-
juster on the gas supply pipe.

13.7 

Adjustment of minimum

level

To adjust the minimum level of the burn-
ers:

1.

Light the burner.

2.

Turn the knob on the minimum posi-
tion.

3.

Remove the knob.

4.

With a thin screwdriver, adjust the by-
pass screw position (A).

A

• If you change from natural gas to liquid

gas, fully tighten the adjustment screw
in.

• If you change from liquid gas to natural

gas, undo the by-pass screw approxi-
mately 1/4 of a turn.

WARNING!

Make sure the flame does not go
out when you quickly turn the
knob from the maximum position
to the minimum position.

ENGLISH

25