Electrolux EKK 61500 OX - Инструкция по эксплуатации - Страница 21

1

2

7.

Carefully lift (step 1) and remove (step
2) the glass panel.

8.

Clean the glass panel with water and
soap. Dry the glass panel carefully.

Installing the door and the glass panel

When the cleaning is completed, install
the glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that af-
ter the installation the surface of the glass
panel frame on the screen-printing zones
is not rough when you touch it.
Make sure that you install the internal
glass panel in the seats correctly. Refer to
the illustration.

11.3 

Oven lamp

WARNING!

Be careful when you change the
oven lamp. There is a risk of elec-
trical shock.

Before you change the oven lamp:

• Deactivate the oven.
• Remove the fuses in the fuse box or

deactivate the circuit breaker.

Put a cloth on the bottom of the
oven to prevent damage to the
oven light and glass cover.

Replacing the oven lamp

1.

You can find the lamp glass cover at
the back of the cavity.
Turn the lamp glass cover counter-
clockwise to remove it.

2.

Clean the glass cover.

3.

Replace the oven lamp with an appli-
cable 300 °C heat-resistant oven
lamp.

Use the same oven lamp type.

4.

Install the glass cover.

12. 

WHAT TO DO IF…

Problem

Possible cause

Remedy

There is no spark when
lighting the gas

There is no electrical sup-
ply

Make sure that the unit is
connected and the elec-
trical supply is switched
on.

There is no spark when
lighting the gas

There is no electrical sup-
ply

Examine the house elec-
trical installation fuse.

ENGLISH

21