Bosch GBH 4 32 DFR S - Инструкция по эксплуатации - Страница 17

 English | 

17

Bosch Power Tools

1 619 929 774 | (2.3.09)

g) If devices are provided for the connec-

tion of dust extraction and collection fa-
cilities, ensure these are connected and 
properly used. 

Use of dust collection can 

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. 

The 

correct power tool will do the job better 
and safer at the rate for which it was de-
signed.

b) Do not use the power tool if the switch 

does not turn it on and off. 

Any power 

tool that cannot be controlled with the 
switch is dangerous and must be re-
paired.

c) Disconnect the plug from the power 

source and/or the battery pack from the 
power tool before making any adjust-
ments, changing accessories, or storing 
power tools. 

Such preventive safety 

measures reduce the risk of starting the 
power tool accidentally.

d) Store idle power tools out of the reach of 

children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool. 

Power tools are dangerous in the hands of 
untrained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts, 
breakage of parts and any other condi-
tion that may affect the power tool’s op-
eration. If damaged, have the power tool 
repaired before use. 

Many accidents are 

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. 

Prop-

erly maintained cutting tools with sharp 
cutting edges are less likely to bind and 
are easier to control.

g) Use the power tool, accessories and tool 

bits etc. in accordance with these in-
structions, taking into account the work-
ing conditions and the work to be per-
formed. 

Use of the power tool for 

operations different from those intended 
could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qual-

ified repair person using only identical 
replacement parts. 

This will ensure that 

the safety of the power tool is maintained.

Hammer Safety Warnings

f

Wear ear protectors. 

Exposure to noise can 

cause hearing loss.

f

Use auxiliary handle(s), if supplied with the 
tool. 

Loss of control can cause personal in-

jury.

f

Hold power tool by insulated gripping sur-
faces, when performing an operation where 
the cutting accessory may contact hidden 
wiring or its own cord. 

Cutting accessory 

contacting a “live” wire may make exposed 
metal parts of the power tool “live” and 
could give the operator an electric shock.

f

Use suitable detectors to determine if utili-
ty lines are hidden in the work area or call 
the local utility company for assistance. 

Contact with electric lines can lead to fire 
and electric shock. Damaging a gas line can 
lead to explosion. Penetrating a water line 
causes property damage or may cause an 
electric shock.

f

When working with the machine, always 
hold it firmly with both hands and provide 
for a secure stance. 

The power tool is guided 

more secure with both hands.

f

Secure the workpiece. 

A workpiece clamped 

with clamping devices or in a vice is held 
more secure than by hand.

f

Keep your workplace clean. 

Blends of mate-

rials are particularly dangerous. Dust from 
light alloys can burn or explode.

f

Always wait until the machine has come to 
a complete stop before placing it down. 

The 

tool insert can jam and lead to loss of control 
over the power tool.

f

Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and 
pull the mains plug when the cable is dam-
aged while working. 

Damaged cables in-

crease the risk of an electric shock.

OBJ_BUCH-337-002.book  Page 17  Monday, March 2, 2009  4:19 PM