Bosch SmartPower MFW2500W - Инструкция по эксплуатации - Страница 18

18 

en

Before using for the first time

Before using for the first time

Before the new appliance can be used, 

it must be fully unpacked, cleaned and 

checked.

Caution!

Never operate a damaged appliance!

■

Remove the base unit and all 

accessories from the packaging.

■

Remove the packaging material that is 

present.

■

Dismantle any assembled parts into 

their individual parts. Do this in reverse 

order, as described under „Preparation“.

■

Check all parts for completeness. 

X

Fig. 

A

■

Inspect all parts for visible damage.

■

Thoroughly clean and dry all parts 

before using for the first time.  

X

 “Care and daily cleaning” see 

page 21

Control and display 

elements

Button 

k

Press button 

k

 to switch on the appliance.  

The drive will start up at once. Press button 

k

 again to switch off the appliance. The 

drive stops.

Release button

Press the release button to unlock an 

attachment fitted on the appliance. Only 

when the release button is pressed is it 

possible to turn the attachment clockwise 

and remove it from the base unit.

Safety devices

Overload protection 

(thermal circuit breaker)

If the motor switches itself off while the 

appliance is being used, the overload 

protection feature has been activated. 

Possible causes may be the simultaneous 

processing of large quantities of food or a 

blockage caused by bones.

X

 “Troubleshooting” see page 25

Base unit

Preparation

W

Risk of injury!

Do not insert the mains plug until all 

preparations for working with the appliance 

are complete and the required attachments 

are assembled correctly and connected to 

the base unit.

■

Place the base unit on a stable and level 

work surface.

The base unit is now prepared.

Base attachment

The base attachment can be used for the 

following   applications:

Meat mincer

For mincing raw or cooked food. Select the 

appropriate perforated disc depending on 

the type and consistency of the food to be 

processed. 

X

 “Tips” see page 23

Sausage filler

For filling artificial and natural casings with 

sausage meat. For producing meat rolls.

Kebbe maker

For producing tubes of dough or minced meat.

Note:

 Other applications are possible 

using the base attachment and appropriate 

accessories available from Customer 

Service.

Caution!

When assembling the different individual 

parts, make sure that the notched markings 

on the inserts match up with the relevant 

one on the housing.

Preparation for meat mincer

W

Risk of injury!

Do not reach into the sharp knife.

Caution!

Always only use one perforated disc.

X

Fig. 

B

1. 

Insert the worm gear with the agitator 

paddle at the front in the housing.