Bosch MFW3X18W - Инструкция по эксплуатации - Страница 22

22 

en

Overload protection 

All models

Operation indicator

The operation indicator lights up when the 

appliance is switched on. On models with 

the reversing function the function indicator 

flashes for as long as the 

+

button is 

pressed.

Release button

Press the release button to unlock an 

attachment fitted on the appliance. Only 

when the release button is pressed is it 

possible to turn the attachment clockwise 

and remove it from the base unit.

Cable storage compartment

The mains cable can be pulled out of the 

cable storage compartment or pushed back 

in again. Only ever pull the cable out as 

much as is required.

Storage compartment

Unused perforated discs belonging to the 

meat mincer can be kept in the storage 

compartment and it closed with the cover.

Overload protection

To prevent serious damage to your 

appliance if the base attachment is 

overloaded, the agitator paddle has a 

notch (predetermined breaking point). If 

overloading occurs, the agitator paddle 

will break at this point. A new agitator 

paddle is available from Customer 

Service (No. 10005188). Spare parts with 

a predetermined breaking point are not 

covered by our warranty obligations.

Replace agitator paddle

X

Fig. 

B

1. 

Release the screw in the agitator paddle 

with a screwdriver (PH2) and remove 

the faulty paddle.

2. 

Fit a new agitator paddle and screw tight 

again.

Speed setting

ONLY MFW3X...

Using the speed setting feature, the speed 

can be set to 

1

 (slow) or 

2

 (fast).

Caution!

For certain applications, it is imperative 

to use speed 

1

 (slow). Take note of the 

recommended speeds! See table 

X

Fig.

P

■

Switch on the appliance with button 

k

. 

The appliance will run at speed 

2

 (fast).

■

Press button 

+

briefly. The 

appliance will switch to speed 

1

 (slow).

■

Press button 

+

briefly. The 

appliance will switch back to speed 

2

(fast).

Reversing function

ONLY MFW3X...

The reversing function is designed to 

release food that has got stuck by briefly 

running the worm gear in reverse. The 

reversing function switches off automatically 

after 15 seconds.

Caution!

–

Never use the reverse function with the 

grain mill attachment or the fruit press 

attachment!

– Never press and hold button 

+

continuously while the appliance is 

switched on. Only press and hold 

button 

+

 continuously once the 

appliance has come to a complete stop. 

■

Switch the appliance off with button 

k

and wait until the drive has stopped.

■

Press and hold button 

+

. 

■

After approx. 5-10 seconds, release 

button 

+

and wait for the drive to 

come to a standstill.

■

Switch the appliance on again with 

button 

k

.

Note: 

If food that has got stuck is not 

released by briefly putting the appliance into 

reverse, switch the appliance off, unplug 

and clean it. 

X

 “Care and daily cleaning” 

see page 27