Bosch MFW 3520G (W) - Инструкция по эксплуатации - Страница 22

22 

en

Base attachment 

Preparation for meat mincer

W

Risk of injury!

Do not reach into the sharp knife.

Caution!

Always only use one perforated disc.

X

 Fig. 

D

1. 

Insert the worm gear with the agitator 

paddle at the front in the housing.

2. 

First fit the knife and then the required 

perforated disc onto the  worm gear.

3. 

Fit the threaded ring onto the housing 

and screw tight in a clockwise direction 

without using force.

The meat mincer is now prepared.

Preparation for sausage filler

X

 Fig. 

E

1. 

Insert the worm gear with the agitator 

paddle at the front in the housing.

2. 

First fit the bearing ring onto the worm 

gear and then the sausage nozzle into 

the housing.

3. 

Fit the threaded ring onto the housing 

and screw tight in a clockwise direction 

without using force.

The sausage filler is now prepared.

Preparation for kebbe maker

X

 Fig. 

F

1. 

Insert the worm gear with the agitator 

paddle at the front in the housing.

2. 

First fit the conical ring onto the worm 

gear and then the kebbe nozzle into the 

housing.

3. 

Fit the threaded ring onto the housing 

and screw tight in a clockwise direction 

without using force.

The kebbe maker is now prepared.

Use

Note: 

The food is processed in different 

ways depending on the application. 

X

 “Recipes” see page 25

The following example describes use of 
the base attachment as a meat mincer:

W

Risk of injury!

–

Do not reach into the feed chute with 

your hands.

–

Only use the pusher when adding more 

food.

Caution!

–

Do not process bones, gristle, sinews or 

other solid components.

–

Do not process frozen meat.

–

Do not apply great force with the pusher.

X

Sequence of figures 

G

1. 

Fit the prepared attachment onto the drive 

of the base unit, holding it at an angle.

2. 

Turn the attachment anticlockwise until 

you hear it click into position.

3. 

Fit the filling tray and insert the pusher 

in the feed chute.

4. 

Prepare your food. Chop up large parts 

beforehand so they fit into the feed 

chute without having to press them in.

5. 

Place a suitable container under the 

attachment. Add the prepared food to 

the filling tray.

6. 

Connect the mains plug. Switch on the 

appliance.

Note (MFW36.../MFW38...): 

After switching on, the appliance runs at the 

ideal speed 

2

 (fast).

7. 

Use the pusher to slide the food down 

the feed chute, applying light pressure.

8. 

Once you have finished, switch off the 

appliance and pull out the mains plug.

9. 

Remove the filling tray and pusher.

10. 

Hold down the release button and turn the 

attachment clockwise until it disengages.

11. 

Remove the attachment, take it apart 

and clean all parts. 

X

 “Care and daily 

cleaning” see page 24