Материнские платы GIGABYTE GA 8I865P - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 12 -
GA-8I865P(-G) M otherboard
English
Step 1: Install the Central Processing Unit (CPU)
Before installing the process or, adhe re to th e following warn ing:
1. Please m ake su re that the m otherboard sup ports the CPU.
2. Plea se take note of the one indente d corne r of the CPU. If you install the CPU in the wrong
direction, the CPU will not in sert properly. If this occurs, please change the insert direction of
the CPU.
3. Please add an even layer of hea t sink paste between the CPU and hea tsink.
4. Please m a ke sure the heatsink is installed on the CPU prior to system use, otherwise
overheating and perm anent dam age of the CPU m ay occur.
5. Please set the CPU host fr equency in accordance with the processor specifications. It is not
recom m ended that the system bus frequency be set beyond hardware
specifications since
it d oes no t m eet the req uired standar ds for the pe ripher als. If you wish to set the frequ ency
bey ond the pr oper specifications, pleas e do so ac cording to your hardware s pecifications
including the CPU, graphics card, m em ory, hard drive, etc.
HT func tiona lity requ ireme nt co nten t :
Enabling the functionality of Hyper-Threading Technology for your com p uter system requires all
of the following platform com po nents:
- CPU: An In tel
®
Pentium
®
4 Proce ssor with HT Te chnology
- Chipset: An Intel
®
Chips et that supp orts HT Tech nology
- BIOS: A BIOS that suppor ts HT Tech nology and has it en abled
- OS: An op eration system that ha s optim izations for HT Technology
Step 1-1: CPU Installation
Anglin g the
r o d t o 6 5 0
1. Ang ling the rod to 65 -degr ee m ay be fee l a
kind of tight, a nd then continue pu ll the rod
to 90-degre e when "click" noise is heard.
2. Pull the rod to th e 90-degree directly.
Pin1 in dicator
3. CPU Top View
Pin1 in dicator
4. Locate Pin 1 in the socket and look for a (golden)
cut edge on the CPU upper corner. Then insert
the CPU into th e sock et.
Socket
Actuation
Lever
