Материнские платы GIGABYTE GA 870A UD3 rev 2 2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 87 -
Appendix
5-1-3 Making a SATA RAID/AHCI Driver Diskette
(Required for AHCI and RAID Mode)
To successfully install operating system onto SATA hard drive(s) that is/are configured to RAID/AHCI mode,
you need to install the SATA controller driver during the OS installation. Without the driver, the hard drive may
not be recognized during the Windows setup process. First of all, copy the driver for the SATA controller from
the motherboard driver disk to a floppy disk. For installing Windows Vista, you also can copy the SATA con
-
troller driver from the motherboard driver disk to a USB flash drive. See the instructions below about how to
copy the driver in MS-DOS and Windows mode.
In MS-DOS mode:
Prepare a startup disk that has CD-ROM support and a blank formatted floppy disk.
Steps:
1: Boot from the startup disk.
2: Remove the startup disk and insert the prepared floppy disk and the motherboard driver disk (here we as
-
sume that the drive letter for your optical drive is D:\).
3: At the A:\> prompt, type the following command. Press <Enter> after the command:
•
For the AMD SB850, type (Figure 1):
(Note 1)
A:\>copy d:\bootdrv\SB8xx\x86\*.*
•
For the GIGABYTE SATA2/JMicron JMB362, type (Figure 2):
(Note 2)
A:\>copy d:\bootdrv\gsata\32bit\*.*
Figure 1
Figure 2
(Note 1) Type the driver directory based on the operating system to be installed. Refer to the following table
for the SATA driver directories for different Windows operating systems.
(Note 2) Change the directory from
\32bit
to
\64bit
for copying the Windows 64-bit driver.
Operating System
Directory
Windows XP 32-bit
Bootdrv\SB8xx\x86
Windows XP 64-bit
Bootdrv\SB8xx\x64
Windows Vista 32-bit (AHCI mode) Bootdrv\SB8xxV\AHCI\LHx86
Windows Vista 32-bit (RAID mode) Bootdrv\SB8xxV\RAID\LH
Windows Vista 64-bit (AHCI mode) Bootdrv\SB8xxV\AHCI\LHx64
Windows Vista 64-bit (RAID mode) Bootdrv\SB8xxV\RAID\LH64A
Windows 7 32-bit (AHCI mode)
Bootdrv\SB8xxW7\AHCI\Win7x86
Windows 7 32-bit (RAID mode)
Bootdrv\SB8xxW7\RAID\W7
Windows 7 64-bit (AHCI mode)
Bootdrv\SB8xxW7\AHCI\Win7x64
Windows 7 64-bit (RAID mode)
Bootdrv\SB8xxW7\RAID\W764A
