Материнские платы GIGABYTE GA 870A UD3 rev 2 2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Appendix
- 86 -
Model Name
RAID Level
Capacity
Status
Members(HDDx)
RDD0: GRAID
0-Stripe
240 GB
Normal
01
[
fg
TAB]-Switch Window
[
hi
]-Select ITEM
[ENTER]-Action
[ESC]-Exit
[ RAID Disk Drive List ]
[ Main Menu ]
[ Hard Disk Drive List ]
Gigabyte Technology Corp. RAID Setup Utility v1.07.16G
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
Model Name
Capacity
Type/Status
HDD0: ST3120026AS
120 GB
RAID Inside
HDD1: ST3120026AS
120 GB
RAID Inside
7.
Save and Exit Setup:
After configuring the RAID array, select the
Save And Exit Setup
item in the main
screen to save your settings before exiting the RAID BIOS utility, then press <Y> (Figure 10).
Model Name
RAID Level
Capacity
Status
Members(HDDx)
RDD0: GRAID
0-Stripe
240 GB
Normal
01
[
hi
]-Select RAID
[SPACE]-Mark Delete
[DEL]-Confirm
[ESC]-Abort
[ RAID Disk Drive List ]
[ Main Menu ]
[ Hard Disk Drive List ]
Gigabyte Technology Corp. RAID Setup Utility v1.07.16G
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
Model Name
Capacity
Type/Status
HDD0: ST3120026AS
120 GB
RAID Inside
HDD1: ST3120026AS
120 GB
RAID Inside
Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA RAID/
AHCI driver and operating system.
Delete the RAID Array:
To delete the array, select
Delete RAID Disk Drive
in the main menu and press <Enter>. The selection bar
will move to the
RAID Disk Drive List
block. Press the <SPACE> key on the array to be deleted; a small tri-
angle will appear to mark the selected array. Press <Delete>. When prompted to confirm your selection (Figure
11), press <Y> to confirm or <N> to cancel.
Figure 10
Figure 11
Save to Disk & Exit (Y/N) ? Y
ALL DATA ON THE RAID WILL LOST!!
ARE YOU SURE TO DELETE (Y/N) ? N
