TP-LINK EX220 AX1800 - Инструкция по эксплуатации - Страница 56

51

Chapter 6

Customize Your Network Settings

6  1   Configure LAN Settings

6  1  1   Change the LAN IP Address

The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to 
its web management page. The LAN IP address together with the Subnet Mask also 
defines the subnet that the connected devices are on. If the IP address conflicts with 
another device in your local network or your network requires a specific IP subnet, you 
can change it.
Follow the steps below to change your IP address.

1  

Visit 

http://tplinkwifi.net

 or 

http://192.168.0.1

, and log in with the password you set 

for the router. 

2  

Go to 

Advanced

>

Network

>

LAN Settings 

page and select

IPv4

.

3  

Enter a new 

IP Address

 appropriate to your needs.

4  

Select the 

Subnet Mask

 from the drop-down list. The subnet mask together with 

the IP address identifies the local IP subnet.

5  

Keep 

IGMP Snooping

 enabled by default. IGMP snooping is the process of listening 

to IGMP (Internet Group Management Protocol) network traffic. The function 
prevents hosts on a local network from receiving traffic for a multicast group they 
have not explicitly joined. 

6  

You can configure the router’s 

Second IP

 and 

Subnet Mask

 for LAN interface 

through which you can also access the web management page.

7  

Keep the rest settings as the default settings.

8  

Click 

Save 

to make the settings effective.