TP-LINK EX220 AX1800 - Инструкция по эксплуатации - Страница 127

122

Chapter 16

VPN Server&Client

16  1   Use OpenVPN to Access Your Home Network

OpenVPN Server is used to create an OpenVPN connection for remote devices to 
access your home network. 
To use the VPN feature, you need to enable OpenVPN Server on your router, and install 
and run VPN client software on remote devices. Please follow the steps below to set up 
an OpenVPN connection.

INTERNET

Home Network

Router (VPN Server)

Remote Devices

Step1  Set up OpenVPN Server on Your Router

1. Visit 

http://tplinkwifi.net

 or 

http://192.168.0.1

, and log in with your TP-Link ID or the 

password you set for the router.

2. Go to 

Advanced

 > 

VPN 

 > 

OpenVPN

, and tick the box of 

Enable VPN Server

.

Note:

•  Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a 

static IP address for router’s WAN port and synchronize your System Time with internet.

•  The first time you configure the OpenVPN Server, you may need to generate a certificate before you enable the VPN 

Server.

3. Select the 

Service Type

 (communication protocol) for OpenVPN Server: UDP, TCP.

4. Enter a VPN 

Service Port

 to which a VPN device connects, and the port number 

should be between 1024 and 65535.

5. In the 

VPN Subnet/Netmask

 fields, enter the range of IP addresses that can be leased 

to the device by the OpenVPN server.

6. Select your 

Client Access

 type. Select 

Home Network Only

 if you only want the 

remote device to access your home network; select 

Internet and Home Network 

if  

you also want the remote device to access internet through the VPN Server.