TP-LINK EX220 AX1800 - Инструкция по эксплуатации - Страница 152

147

Chapter 17

Manage Your Router

All devices or the specific device on the internet can log in to your router using the 
address displayed on the 

Manage This Router via the Address 

field to manage the 

router.

Tips:

1.  If you were warned about the certificate when visiting the web management page remotely, click 

Trust

 (or a 

similar option) to continue. To avoid this warning, you can download and install the certificate on the router’s web 
management page at 

Advanced 

> 

System Tools 

> 

Administration

.

2.  The router’s WAN IP is usually a dynamic IP. Please refer to 

Set Up a Dynamic DNS Service Account

 if you want to log 

in to the router through a domain name.

17  7  4   HTTP Referer Head Check

HTTP referer header check function can protect your networks against CSRF attacks. 
This function is  enabled by default. You can disable this function if needed.

1  

Visit 

http://tplinkwifi.net

 or 

http://192.168.0.1

, and log in with the password you set 

for the router.

2  

Go to

 Advanced 

> 

System Tools 

> 

Administration

, and locate the 

HTTP Referer 

Head Check

section.

3  

Clear the 

Enable

 check box and click 

Save

 if you want to disable this function.

17  7  5   ICMP Ping

ICMP (Internet Control Message Protocol) Ping is used to diagnose the network by 
sending ICMP echo request packets to the target remote or local host and waiting for 
an ICMP response.
You can control the router’s replies to ICMP Ping requests.

1  

Visit 

http://tplinkwifi.net

 or 

http://192.168.0.1

, and log in with the password you set 

for the router.

2  

Go to

 Advanced 

> 

System Tools 

> 

Administration

, and locate the 

ICMP Ping

 section.