Makita UM164DWE - Инструкция по эксплуатации - Страница 7

7 

ENE015-1 

Intended use

The tool is intended for cutting lawn edges or sprouts. 

ENG104-2 

Noise

The typical A-weighted noise level determined according 
to IEC60335: 

Sound pressure level (L

pA

) : 75.9 dB(A) 

Uncertainty (K) : 2.5 dB(A) 

The noise level under working may exceed 80 dB (A). 

Wear ear protection. 

ENG244-1 

Vibration 

The vibration emission value determined according to 
IEC60335 : 

Vibration emission (a

h

) : 2.5 m/s

2

 or less 

Uncertainty (K) : 1.5 m/s

2 

ENG901-1 

• 

The declared vibration emission value has been 
measured in accordance with the standard test 
method and may be used for comparing one tool 
with another. 

• 

The declared vibration emission value may also be 
used in a preliminary assessment of exposure. 

WARNING: 

• 

The vibration emission during actual use of the 
power tool can differ from the declared emission 
value depending on the ways in which the tool is 
used. 

• 

Be sure to identify safety measures to protect the 
operator that are based on an estimation of 
exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH003-12 

For European countries only 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine: 

Cordless Grass Shear

Model No./ Type: UM164D 
are of series production and 

Conforms to the following European Directives: 

2006/42/EC 

And are manufactured in accordance with the following 
standards or standardised documents: 

IEC60335, EN60745 

The technical documentation is kept by our authorised 
representative in Europe who is:   

Makita International Europe Ltd, 
Michigan, Drive, Tongwell, 
Milton Keynes, MK15 8JD, England 
 

27th August  2009

000230 

Tomoyasu Kato 

Director 

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, JAPAN 

GEA010-1 

General Power Tool Safety 
Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury. 

Save all warnings and instructions for 
future reference. 

GEB070-1 

SAFETY INSTRUCTIONS 

WARNING! IMPORTANT READ CAREFULLY all 

safety warnings and all instructions BEFORE USE    .

Failure to follow the warnings and instructions may result 
in electric shock, fire and/or serious injury. 

Save all warnings and 
instructions for future reference. 

General instructions 

1. 

To ensure correct operation, user has to read this 
instruction manual to make himself familiar with 
the handling of the equipment. Users insufficiently 
informed will risk danger to themselves as well as 
others due to improper handling. 

2.  Never allow people unfamiliar with these 

instructions, people (including children) with 
reduced physical, sensory or mental capabilities, 
or lack of experience and knowledge to use the 
equipment. Local regulations can restrict the age 
of the operator. 

3.  Use the equipment with the utmost care and 

attention. 

4.  Operate the equipment only if you are in good 

physical condition. Perform all work calmly and 
carefully. Use common sense and keep in mind 
that the operator or user is responsible for 
accidents or hazards occurring to other people or 
their property. 

5.  Never operate the machine while people, 

especially children, or pets are nearby. 

6.  Never use the equipment after consumption of 

alcohol or drugs, or if feeling tired or ill. 

7.  The motor is to be switched off immediately in 

case that the equipment shows any problem or