Siemens TE502206RW - Инструкция по эксплуатации - Страница 25

21

de

en

Problem

Cause

Solution

Display shows 

Error 

Call hotline

The appliance has a fault.

Please call the hotline�

The water filter does not 

stay in position in the water 

tank (16)�

The water filter is not 

mounted correctly.

Firmly press the water filter 

straight down into the tank 

connection�

The coffee grounds are not 

compact and are too wet�

The grinding setting is 

too fine or too coarse, or 

not enough ground coffee 

has been used.

Adjust the grinding unit to a 

coarser or finer setting, or use 

2 level measuring spoons of 

ground coffee.

Display shows  

Clean brewing unit

Brewing unit 

(5) is soiled�

Clean brewing unit 

(5)�

Too much pre-ground 

 coffee in the brewing 

unit 

(5)�

Clean brewing unit 

(5)� 

Pour in no more than 2 level 

measuring spoons of ground 

coffee�

The brewing unit’s 

mechanism is stiff�

Remove and clean the brewing 

unit, see “Maintenance and daily 

cleaning”�

Coffee or milk froth quality 

varies considerably� 

Build-up of limescale in 

the appliance�

Descale the appliance with two 

descaling tablets as described in 

the instructions.

Water dripped onto the 

inner floor of the appliance 

when the drip tray (8) was 

removed�

Drip tray (8) removed too 

early�

Wait a few seconds after the 

last drink was dispensed before 

removing the drip tray (8)�

Display shows  

Insert brewing unit

Brewing unit (5) is 

missing or was not 

recognised�

Switch off the appliance with the 

brewing unit (5) in place, wait 

three seconds and switch on the 

appliance�

Restore the unit to its 

original factory settings 

(“Reset”)�

You changed some 

settings and want to 

discard them�

Turn off the unit with the power 

on/off switch 

O / I

 (9)� Press 

and hold the 

e

off /

j

  (12)  and 

the 

h

 (11) button and turn the 

appliance on with the power on/

off switch 

O / I

 (9).  Confirm by 

pressing the start button 

start

(10). The factory settings are 

now activated�

If you are unable to solve the problem, please call the hotline.