Siemens TE502206RW - Инструкция по эксплуатации - Страница 14

10

de

en

Adjusting the 

grinding unit

The rotary selector (3) adjusts the grind 

settings from coarse to fine.

¡

Warning

Adjust the grinding unit only while it is 

 running! Otherwise the appliance may be 

damaged� Do not reach into the grinding 

unit.

● While the grinding unit is running, adjust 

the rotary selector (3) from fine (

a:

 Turn 

anticlockwise) to coarse (

b:

 Turn clock

-

wise) as required.

a

b

Note: 

The new setting will not become 

apparent until after the second cup of 

coffee�

Tip: 

For dark roast coffee beans, choose a 

finer grind, for lighter beans a coarser grind.

Preparation using 

coffee beans

This fully automatic espresso machine 

grinds beans freshly for each brew� 

Tip: 

If possible, use only beans for fully 

automatic coffee and espresso machines. 

For optimal quality, deep-freeze the beans 

or store in a cool place in sealed containers� 

Coffee beans can be ground while frozen.

Important:

 Fill the water tank (16) with 

fresh water every day. The tank 

(16)

 should 

always contain sufficient water for operating 

the appliance�

Different coffee drinks can be prepared 

quite simply at the press of a button. 

Preparation

The appliance must be ready for use.

1� 

Place the pre-warmed cup(s) under the 

coffee outlet (7). 

Tip:

 For a small espresso, always pre

-

heat the cup, e.g. using hot water.

2� 

Select the required coffee and the 

required per-cup quantity by turning the 

upper rotary knob (14). The selected 

coffee and the per-cup quantity are 

shown in the display�

3� 

Select the required coffee strength by 

turning the lower rotary knob (13). The 

selected coffee strength is shown in the 

display�

4�  Press the 

start

 button

 (10)�

The coffee is brewed and then dispensed 

into the cup(s).

Press the 

start

 button (10) again to cut the 

brewing process short�