Siemens TE502206RW - Инструкция по эксплуатации - Страница 18

14

de

en

8�  Attach the milk frother to the steam 

valve� Check that the red mark on the 

steam valve is covered�

¡

Risk of scalding

Only use the appliance when the milk 

frother (6) is completely assembled and 

fitted.

Cleaning the brewing unit

Clean the brewing unit regularly. 

To pre-clean the brewing unit automatically:

1�  Select 

e

 by turning the rotary knob (14).

2� 

Place an empty glass under outlet (7).

3�  Press the 

start

 button (10).

The appliance rinses. 

In addition to the automatic cleaning 

 programme, the brewing unit (5a) should be 

removed regularly for cleaning. (See 

figure 

E

 at the start of the operating instructions.) 

1�  Switch the appliance off at the power 

on/off switch 

O / I 

(9). No buttons are lit.

2� 

Open the door (5b) to the brewing unit.

3�  Slide the red lock (5d) on the brewing 

unit completely to the left.

4� 

Press the eject lever (5c) down fully. The 

brewing unit is released.

5� 

Grasp the brewing unit (5a) by the 

recessed grips and remove carefully.

6� 

Rinse the brewing unit (5a) thoroughly 

under running water.

7� 

Hold the brewing unit sieve under the 

running water.

Important: 

Do not clean with detergent or 

other cleaning agents and do not put it in 

the dishwasher�

8� 

Wipe out the inside of the appliance 

thoroughly with a damp cloth and 

remove any coffee residues.

9� 

Allow the brewing unit (5a) and the 

inside of the appliance to dry�

10� 

Reinsert the brewing unit (5a) fully into 

the appliance�

11� 

Press the eject lever (5c) up fully.

12� 

Slide the red lock (5d) fully to the right 

and close the door (5b)�