Siemens TE502206RW - Инструкция по эксплуатации - Страница 10

6

de

en

“Drink selection” rotary knob

This rotary knob (14) is used 

to select the required drink 

and the per-cup quantity. It 

is also used to change user 

settings�

a

to 

c

Small Espresso

Espresso

Small Café Crème

Café Crème 

Large Café Crème

b

to 

d

2 small Espresso
2 Espresso
2 small Café Crème
2 Café Crème 
2 l arge Café Crème

e

Rinse machine

f

Rinse milk system

N.B.: 

If a drink is selected that cannot be 

prepared,

 Invalid combination

 appears in 

the display� Change the coffee strength or 

the selected drink�

Milk frother

Pull the milk frother (6) out to open it and 

push it back in to close it.

Display messages

The display (15) shows not only the current 

operating status, but also various mes

-

sages that give you status information or 

let you know when you need to take action. 

As soon as you have taken the necessary 

action, the message disappears and the 

menu for drink selection is displayed again.

Before using for the 

first time

General

Fill the water tank with fresh, cold, uncar-

bonated water only, and preferably use 

only beans for fully automatic coffee and 

espresso machines. Do not use coffee 

beans that have been glazed, caramelised 

or treated with other additives containing 

sugar, since they will block the brewing unit. 

The water hardness setting can be adjusted 

on this appliance. The factory default setting 

for the water hardness is 4� Check the 

water hardness with the enclosed test strip�

If the check reveals a value other than 4, 

change the setting on the appliance accord-

ingly after switching on (see “Menu settings” 

Water hardness

 on page 9)�

Switching on the appliance

1� 

Remove the protective film.

2� 

Place the fully automatic espresso 

machine on a flat, water-resistant 

surface that can take its weight. Make 

sure that the machine’s ventilation slots 

remain unobstructured.

Important:

 Only use the appliance in 

frost-free rooms� If the appliance has been 

transported or stored at temperatures below 

0 °C, wait at least 3 hours before operation.