Siemens TE502206RW - Инструкция по эксплуатации - Страница 12

8

de

en

Water filter

A water filter can prevent scale buildup.

Before a new water filter is used, it must be 

rinsed. To do this, proceed as follows:

1� 

Press the water filter firmly into the 

water tank with the aid of the measuring 

spoon (18)� 

2� 

Fill the water tank (16) with water up to 

the 

max

 mark�

3�  Press and hold the 

e

off /

j

 button (12) 

for at least three seconds. The menu 

opens�

4�  Press the 

e

off /

j

 button (12) 

 repeatedly until the display shows 

No / Old filter

�

5�  Select 

Activate filter

 with the upper 

rotary knob (14)�

6�  Press the 

start

 button (10). 

7�  Place a receptacle with a capacity of 

0.5 litres under the outlet.

8�  Press the 

start

 button (10). 

9� 

Pull the milk frother (6) to open it.

10� 

Water will now flow through the filter to 

rinse it�

11� 

Push the milk frother (6) in to close it.

12� 

Empty the container. 

The appliance is ready to use once more.

Note: 

Rinsing the filter simultaneously 

activates the setting for the 

Change filter!

display�

The filter is no longer effective when the 

Change filter! 

display appears, or at 

the latest after 2 months� It needs to be 

replaced for reasons of hygiene and so that 

there is no build-up of limescale (this could 

damage the appliance)�

Replacement filters can be obtained from 

retailers (TZ70003) or from customer 

 service (467873). If no new filter is used, 

turn the 

filter

 setting to 

No / Old

�

Note:

 You can use the filter indicator to 

mark the month in which you inserted the 

filter. You can also mark the month in which 

you will need to replace the filter next (at 

the latest after two months)�

Note: 

If the appliance has not been used 

for a prolonged period (e�g� vacation) the 

filter should be rinsed before the appliance 

is used again. To do so, dispense a cup of 

hot water and pour it away.