Электропилы STIGA SPR 500 AE 278420008/ST1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN - 17
•
Only authorised service centres can carry
out guaranteed repairs and maintenance.
•
The authorised service centres only
use genuine spare parts. Genuine
spare parts and accessories have been
designed specifically for machines.
• Non-genuine spare parts and accessories
are not approved. Use of non-genuine
spare parts and accessories cause
the warranty to be invalidated.
•
It is advisable to send your machine
once a year to an authorised service
centre for servicing, assistance
and safety device inspection.
12. WARRANTY COVERAGE
The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover
damages caused by:
•
Failure to become familiar with the
documentation accompanying the machine.
• Carelessness.
•
Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of accessories not supplied or
approved by the manufacturer.
The warranty does not cover:
•
Normal wear and tear of consumables,
such as cutting means, safety bolts.
•
Normal wear and tear.
The purchaser is protected by his or her own
national legislation. The purchaser’s rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
13. MAINTENANCE TABLE
Intervention
Frequency
Paragraph
First time
And then after
every
MACHINE
Check all fasteners
-
Before each use
7.7
Safety checks/check controls
-
Before each use
6.2
Check the chain catcher
-
Before each use
7.5
General cleaning and inspection
-
After each use
7.4
Cleaning the chain
-
After each use
7.4.2
Check the machine and bar lubrication holes
-
Before each use
7.6
Check the chain brake metal band
-
Once a month
8.1 *
Check the chain drive sprocket
-
Once a month
8.2 *
Chain maintenance
-
-
8.3 *
Bar maintenance
-
-
8.4
Topping up the chain oil level
-
Before each use
7.3
* Interventions which must be carried out by your dealer or an authorised service centre
14. TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
SOLUTION
1.
When the safety button
is pressed, the blue
light does not light up
Battery is not inserted or
is inserted incorrectly
Make sure that the battery is
inserted correctly (par. 7.2.3)
