STIGA SPR 500 AE 278420008/ST1 - Инструкция по эксплуатации - Страница 171

EN - 1

WARNING!: READ THE INSTRUCTION BOOKLET THOROUGHLY 

BEFORE USING THE MACHINE. Keep for future reference.

EN

TABLE OF CONTENTS

1.  GENERAL ASPECTS ................................... 1

2.  SAFETY REGULATIONS .............................. 2

3.  GETTING TO KNOW THE MACHINE ........... 5

  3.1  Description of the machine and planned 

use ........................................................ 5

  3.2  Safety signs

 .......................................... 6

  3.3  Identification label

 ................................. 6

  3.4  Main components

 ................................. 7

4. ASSEMBLY ................................................... 7

  4.1  Assembly components

 .......................... 7

  4.2  Assembly of the guide bar and toothed 

chain ..................................................... 7

5. CONTROLS.................................................. 8

  5.2  Throttle trigger lever .............................. 8

  5.3  iInterlock lever

 ....................................... 8

  5.4  Chain brake

 ........................................... 8

6.  USING THE MACHINE ................................. 9

  6.1  Preliminary procedures

 ......................... 9

  6.2  Safety checks

 ........................................ 9

  6.3  Preparing to use the chainsaw on the 

tree ...................................................... 10

 6.4  Start-up ............................................... 10

  6.5  Working

 ............................................... 10

  6.6  Forestry work

 ...................................... 11

  6.7  For pruning high up using a rope and a 

belt harness ........................................ 12

  6.8  Advice for operation ............................ 13

 6.9  Stop .................................................... 13

  6.10 After  use .............................................. 13

7.  ROUTINE MAINTENANCE ........................ 13

  7.1  General information

 ............................. 13

  7.2  Battery

 ................................................ 14

  7.3  Topping up the chain oil tank

 ............... 14

 7.4  Cleaning .............................................. 15

  7.5  Chain catcher ...................................... 15

  7.6  Machine and bar lubrication holes ...... 15

  7.7  Nuts and bolts ..................................... 15

8.  OCCASIONAL MAINTENANCE ................. 15

  8.1  Chain brake metal band

 ...................... 15

  8.2  Chain drive sprocket

 ........................... 15

  8.3  Maintenance of the toothed chain ....... 15

  8.4  Guide bar maintenance

 ....................... 16

9. STORING ................................................... 16

  9.1  Storing the machine

 ............................ 16

  9.2  Storing the battery

 ............................... 16

10. HANDLING  AND  TRANSPORTATION ....... 16

11. ASSISTANCE AND REPAIRS ..................... 16

12. WARRANTY  COVERAGE .......................... 17

13. MAINTENANCE  TABLE .............................. 17

14. TROUBLESHOOTING ................................ 17

15. ATTACHMENTS ON REQUEST ................. 19

  15.1 Battery

 ................................................ 19

  15.2 Battery charger

 ................................... 19

  15.3 Bars and chains .................................. 19

1.  GENERAL ASPECTS

 1.1  HOW TO READ THE MANUAL

Some paragraphs in the manual contain 

important information regarding safety and 

operation and are emphasized in this manner:

 NOTE 

 or 

 IMPORTANT 

  These give 

details or further information on what has been 

previously indicated and aim to prevent damage 

to the machine or cause other damage.

The 

 symbol highlights danger. Failure to 

observe the warning can lead to the risk of 

injury to oneself and others and/or damage.

The paragraphs inside a grey dotted frame 

refer to optional features not available on all 

the models referred to in this booklet. Check 

if the feature is available on your model.

Whenever reference is made to a position on the 

machine "front", "back", "left" or "right" hand side, 

this refers to the operator's working position.

 1.2  REFERENCES

 1.2.1  Figures

The figures in these instructions for 

use are numbered 1, 2, 3, etc.

The components indicated in the figures are 

identified with letters A, B, C, and so on.

Reference to component C in figure 

2 is indicated with the wording: "See 

fig. 2.C" or simply "(Fig. 2.C)".

The figures are given as a guide only. 

The actual pieces can differ from 

those illustrated in this document.

 1.2.2  Titles

The manual is divided into chapters and 

paragraphs. The title of paragraph “2.1 Training” is 

a sub-title of “2. Safety regulations". References 

to titles or paragraphs are marked with the 

abbreviation chap. or par. and the relevant 

number. Example: “chap. 2” or “par. 2.1.