STIGA SPR 500 AE 278420008/ST1 - Инструкция по эксплуатации - Страница 175

EN - 5

c) Use only batteries specifically designed 

for your power tool.

 The use of other 

batteries may cause injuries and fire risks.

d) 

Keep all unused batteries at a distance 

from paper clips, coins, keys, nails, 

screws or other small metal objects as 

contact with the same can cause short 

circuits.

 Short circuits between battery 

contacts can lead to explosion or fires.

e) 

Batteries in poor condition can cause 

liquids to leak. Avoid contact with the 

liquid. In the case of accidental contact 

flush with water. If the liquid comes into 

contact with the eyes, also seek medical 

advice. Liquid leaking from the battery 

may cause skin irritation or burns.

f)  Check that the accumulator is in good 

condition and there are no signs of 

damage. Do not use the device with 

a damaged or worn accumulator.

 2.4  PROTECTING THE ENVIRONMENT

Safeguarding the environment must be a relevant 

and priority aspect of machine use, of benefit to 

the community and the environment we live in. 

•  Avoid being a disturbance to the 

neighbourhood. Use this machine at 

reasonable times of the day only (not 

early morning or late evening when the 

noise could cause disturbance).

• 

A certain amount of chain lubricating oil 

is released into the environment when 

the machine is running, so only use 

biodegradable oils made specifically for this 

use. Use of a mineral oil or motor oil causes 

serious damage to the environment.

• 

Comply with local regulations for the 

disposal of packaging, deteriorated parts or 

any elements with a strong environmental 

impact; this waste must not be disposed of 

as normal waste, it must be separated and 

taken to specified waste disposal centres 

where the material will be recycled.

• 

Comply with local regulations for 

the disposal of waste materials

• 

When the machine is withdrawn from service, 

do not dispose of it in the environment, 

but take it to a waste disposal facility in 

accordance with the local regulations in force.

Do not throw electrical equipment away 

with domestic waste. According to the 

European Directive 2012/19/EU on 

electrical and electronic equipment 

waste and its implementation in 

compliance with national standards, old electrical 

equipment must be collected separately, for eco-

compatible recycling. If electrical equipment is 

disposed of in landfills or in the ground, 

hazardous substances can leak into the 

groundwater and contaminate the food chain, 

damaging your health and well-being. For further 

information on the disposal of this product, 

contact your dealer or a domestic waste 

collection service.

At the end of their working life, dispose of 

batteries paying due attention to the 

environment. Batteries contain material 

classified as hazardous for you and the 

environment. They must be removed and 

disposed of separately at a facility that accepts 

lithium-ion batteries.

Separate waste collection of the products 

and packaging used allows the materials 

to be recycled and reused. Reuse of 

recycled materials help to prevent 

environmental pollution and reduces the 

demand for raw materials.

3.  GETTING TO KNOW THE MACHINE

 3.1  DESCRIPTION OF THE MACHINE 

AND PLANNED USE

This machine is a forestry tool and 

precisely a battery powered chainsaw 

designed for trimming and pruning 

work performed directly on the tree.

The machine is essentially composed of a 

battery powered motor and a guide bar that 

that takes the power from the battery to the 

motor which drives the cutting chain.

The operator is able to operate the machine with 

two hands, using the front and rear hand grips, 

and can use the main controls, always remaining 

at a safe distance from the cutting means.

 3.1.1  Intended use

This special type of chainsaw 

has been designed specifically for the 

trimming of trees and must only be used 

by a trained operator following carefully 

planned and secure work instructions. 

This chainsaw is only destined to the 

trimming of trees when the above-

mentioned conditions are complied with. 

It is generally conceived for use with two 

hands, just like a standard chainsaw. 

Some national regulations can 

restrict use of the machine.

This machine was designed 

and manufactured for: