Makita DUC356Z - Инструкция по эксплуатации - Страница 17

17 ENGLISH

3.

Insert the battery cartridge into the tool. Pull the 

switch trigger to flow built-up dust or particles off the oil 

discharge hole by discharging chain oil.

4.

Remove the battery cartridge from the tool. 

Reinstall the sprocket cover and saw chain on the tool.

Replacing the sprocket

CAUTION:

A worn sprocket will damage a 

new saw chain. Have the sprocket replaced in this 

case.

Before fitting a new saw chain, check the condition of 

the sprocket.

► 

Fig.33:

1.

 Sprocket 

2.

 Areas to be worn out

Always fit a new locking ring when replacing the 

sprocket.

► 

Fig.34:

1.

 Locking ring 

2.

 Sprocket

NOTICE:

Make sure that the sprocket is installed 

as shown in the figure.

Storing the tool

1.

Clean the tool before storing. Remove any chips 

and sawdust from the tool after removing the sprocket 

cover.

2.

After cleaning the tool, run it under no load to lubri-

cate the saw chain and guide bar.

3.

Cover the guide bar with the guide bar cover.

4.

Empty the oil tank.

Instructions for periodic maintenance

To ensure long life, prevent damage and ensure the full functioning of the safety features, the following maintenance 

must be performed regularly. Warranty claims can be recognized only if this work is performed regularly and prop-

erly. Failure to perform the prescribed maintenance work can lead to accidents! The user of the chain saw must not 

perform maintenance work which is not described in the instruction manual. All such work must be carried out by our 

authorized service center.

Check item / Operating time

Before 

operation

Everyday

Every week

Every 3 

month

Annually

Before 

storage

Chain saw

Inspection.

-

-

-

-

-

Cleaning.

-

-

-

-

-

Check at 

authorized 

service center.

-

-

-

-

Saw chain

Inspection.

-

-

-

-

-

Sharpening if 

necessary.

-

-

-

-

-

Guide bar

Inspection.

-

-

-

-

Remove from 

the chain saw.

-

-

-

-

-

Chain brake

Check the 

function.

-

-

-

-

-

Have it 

inspected 

regularly at 

authorized 

service center.

-

-

-

-

-

Chain 

lubrication

Check the oil 

feed rate.

-

-

-

-

-

Switch trigger

Inspection.

-

-

-

-

-

Lock-off lever

Inspection.

-

-

-

-

-

Oil tank cap

Check 

tightness.

-

-

-

-

-

Chain catcher

Inspection.

-

-

-

-

-

Screws and 

nuts

Inspection.

-

-

-

-

-