Bosch AKE 45 S 0.600.834.700 - Инструкция по эксплуатации - Страница 21

 English | 

21

Bosch Power Tools

F 016 L81 408 | (18.11.15)



Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of electric 
shock.



Do not abuse the cord. Never use the cord for carrying, 
pulling or unplugging the power tool. Keep cord away 
from heat, oil, sharp edges and moving parts. 

Damaged 

or entangled cords increase the risk of electric shock.



When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. 

Use of a cord suitable 

for outdoor use reduces the risk of electric shock.



If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected 
supply. 

Use of an RCD reduces the risk of electric shock.

Personal safety



Stay alert, watch what you are doing and use common 
sense when operating a power tool. Do not use a power 
tool while you are tired or under the influence of drugs, 
alcohol or medication. 

A moment of inattention while op-

erating power tools may result in serious personal injury.



Use personal protective equipment. Always wear eye 
protection. 

Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 
used for appropriate conditions will reduce personal inju-
ries.



Prevent unintentional starting. Ensure the switch is in 
the off-position before connecting to power source 
and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.



Remove any adjusting key or wrench before turning 
the power tool on. 

A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.



Do not overreach. Keep proper footing and balance at 
all times. 

This enables better control of the power tool in 

unexpected situations.



Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from 
moving parts. 

Loose clothes, jewellery or long hair can be 

caught in moving parts.



If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. 

Use of dust collection can re-

duce dust-related hazards.

Power tool use and care



Do not force the power tool. Use the correct power tool 
for your application. 

The correct power tool will do the 

job better and safer at the rate for which it was designed.



Do not use the power tool if the switch does not turn it 
on and off. 

Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.



Disconnect the plug from the power source and/or the 
battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 

tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.



Store idle power tools out of the reach of children and 
do not allow persons unfamiliar with the power tool or 
these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.



Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other 
condition that may affect the power tool’s operation. If 
damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 
tools.



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account 
the working conditions and the work to be performed. 

Use of the power tool for operations different from those 
intended could result in a hazardous situation.

Service



Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Chain Saw Safety Warnings



Keep all parts of the body away from the saw chain 
when the motor is operating. Before you start the chain 
saw, make sure the saw chain is not contacting any-
thing. 

A moment of inattention while operating chain saws 

may cause entanglement of your clothing or body with the 
saw chain.



Always hold the chain saw with your right hand on the 
rear handle and your left hand on the front handle. 

Holding the chain saw with a reversed hand configuration 
increases the risk of personal injury and should never be 
done.



Hold the power tool by insulated gripping surfaces on-
ly, because the saw chain may contact hidden wiring or 
its own cord. 

Saw chains contacting a “live” wire may 

make exposed metal parts of the power tool “live” and 
could give the operator an electric shock.



Wear safety glasses and hearing protection. Further 
protective equipment for head, hands, legs and feet is 
recommended. 

Adequate protective clothing will reduce 

personal injury by flying debris or accidental contact with 
the saw chain.



Do not operate a chain saw in a tree. 

Operation of a chain 

saw while up in a tree may result in personal injury.



Always keep proper footing and operate the chain saw 
only when standing on fixed, secure and level surface. 

Slippery or unstable surfaces such as ladders may cause a 
loss of balance or control of the chain saw.

OBJ_BUCH-2245-002.book  Page 21  Wednesday, November 18, 2015  12:45 PM