Fulgor Milano FCO 9013 TM X - Инструкция по эксплуатации - Страница 53

EN

13

6 - General Oven Information

Before using your oven for the first time remove all packing and foreign materials from the oven(s). Any material of this sort left inside 

may melt or burn when the appliance is used.

Error codes

This code appears in the event of the electronic control 

indicating a fault. When the error appears, the current function 

is blocked. If the type of error is related to a safety function, 

the oven becomes unusable and every time a start attempt is 

made, the same error appears (in which case call in the after-

sales service), while if the error relates to a minor fault, after 

being restarted the oven can be used for the functions that do 

not involve the faulty part (e.g., a heating element).

Beeps

Confirms that the command has been received after a key has 

been pressed.

It also indicates that a time function has been completed (e.g. 

Timer or Timed Cooking). During the execution of a recipe, 

an acoustic signal warns the user that the oven is waiting for 

operation by the user (e.g., insert the dish or turn it over).

Beeps also signal an oven fault.

Default Settings

The cooking modes automatically select a suitable temperature 

when the cooking mode is selected, these can be changed 

when a different one is needed.

F Failure Number Codes

These codes are displayed when the electronic control detects 

a problem in the oven or in the electronics.

The error code is recorded in the Error Log in the Setup menu. 

This error can be communicated to the service technician so 

he/she can understand the possible cause of the problem in 

advance.

Preheat and Fast Preheat

Whenever a cooking mode is set and the oven is heating, 

the preheating starts, during this period, the instantaneous 

temperature is displayed together with the thermometer icon.

As soon as the 100% is reached, the control sounds an “end of 

preheat” tone and the current temperature value disappears.

When it’s necessary to heat up the oven rapidly, a Fast 

Preheat mode is available: it uses the heating elements and the 

convection fan in a special way, in order to reduce the heating 

time as long as possible.

After having set one of the cooking functions for which the 

fast preheat is available and set the desired temperature value 

touch the   key, after entering the functions menu, select the 

icon   by means of the keys     and confirm by means 

of the key  .

As soon as the set-point temperature is reached, the control 

sounds a and both “Fast Preheat Icon” and “current 

temperature” disappear. The oven switches automatically to 

the desired cooking mode that was previously set: put the food 

inside now.

Timer

WARNING

The timer on your oven does not turn the appliance on or 

off, its only purpose is to alert you through the buzzer. When 

you want to turn off the oven automatically, use the end-of-

cooking or delayed cooking function.

NOTE  Pressing the OFF button does not reset or stop the 

timer.

1.  Press the button   and set the desired time using the 

arrows     and confirm with the button   . To switch 

the selection between hours and minutes use the arrows   

.

2.  The time can be set from 1 minute to 12 hours and 59 

minutes and, when set, the remaining time is always visible 

in the bottom status bar until the time expires or is reset.

3.  To change or cancel the time set, you must reset the timer 

by pressing and holding the button   for a few seconds.

4.  Timer format is usually HR:MIN, switching into MIN:SEC 

during the last minute.

5.  When the time expires, the display shows 00:00 and the 

buzzer will sound for one minute or until the button   is 

pressed.