Candy FXE629X - Инструкция по эксплуатации - Страница 7

Bulb characteristics:

230 V AC - 25W- E 14 base Temperature 300°C to change a defective 
bulb, just :

•Unscrew the glass cover,
•Unscrew the bulb,
•Replace it with the same type: see characteristics above,
•After  replacing  the  defective  bulb,  screw  back  the 

protective glass cover.

07 GB

CLEANING THE DOOR GLASS

Internal door glass of this oven can be removed and cleaned.
In order to clean the internal glass follow these instructions;

Picture 1

Picture  3

Picture  4

Picture  5

• Open the door of the oven.
  

(Picture1)

• 

upwards.

Picture 

Remove the top metallic cover by

pulling it 

(

4

• 

 pulling it 

out of the door frame

Picture 

Remove the glass by gently

(

5)

• Remove the screws as shown in 

Picture  Picture 

(

3)

• Lock the hinges as shown in 

Picture 

2 before starting the cleaning 
operation.
Unlock the hinges when the cleaning 
operation is finished. 

Picture 

(

2)

Picture  2

Picture  7

• ON ALL GLASES LOW-E 
sign must be properly 
readable and must be 
positioned on the left corner of 
the door, close to the left side 
hinge. In this way the printed 

st

surface of the 1  glass will 
remain INSIDE the door.

• 

reverse

After cleaning the glass re-

assemble the parts in the 

 order of removal.

1

2

3

• *For 

 ovens, please 

d

remove also 2  and 

 glasses . 

(

Picture  6)

Pyrolytic

n

rd

3

Picture  6

SELF-CLEANING OVEN WITH CATALYTIC

Special  self-cleaning  panels  covered  in  a  micro-porous  coating  are 
available as optional extras for all models. If they are fitted, the oven 
no longer needs to be cleaned by hand.
The fat that is splattered onto the sides of the oven during roasting is 
eliminated by the microporous coating which breaks the fat down by 
catalysis and transforms it into gas.
Excessive splattering may nevertheless block the pores and therefore 
hinder  self-cleaning. The  self-cleaning  capacity  may  be  restored  by 
switching on the empty oven to maximum for about 10-20 minutes.
Do  not  use  abrasive  products,  metal  cleaning  wads,  sharp  objects, 
rough  cloths,  or  chemical  products  and  detergents  that  may 
permanently damage the catalytic lining.
It is a good idea to use deep roasting trays to roast fatty foods such as 
joints of meat etc. and to put a tray underneath the grill to catch surplus 
fat.If  the  walls  of  the  oven  are  so  thickly  coated  in  grease  that  the 
catalytic lining is no longer effective remove surplus grease with a soft 
cloth or sponge soaked in hot water.
The lining must be porous for self-cleaning to be effective.

All catalytic linings currently on the market have a working life of 

about 300 hours. They should therefore be replaced after about 300 
hours.

N.B.: 

OVEN LIGHTING

Disconnect  the  power  supply  from  the  oven  before  cleaning  or 
replacing the lamp.
The  bulb  and  its  cover  are  made  of  material  resistant  to  high 
temperatures.