Kaiser KCT 777 - Инструкция по эксплуатации - Страница 6

6

EN 

    H05RR 

– 

F3x2.5 

    H05RR 

– 

F4x1.5

H05RR – F4x1.5 

H05RR – F5x1.5 

H05RR – F3x2.5 

H05RR – F4x1.5 

H05RR – F5x1.5 

NSTALLATION  INSTRUCTIONS 

ELECTRICAL CONNECTION

 
Before connecting the cooking hob to the mains power 
supply, make sure that: 
 



  the plant characteristics are such as to follow 

what is indicated on the matrix plate placed at the 
bottom of the working area, 



  the mains supply has an efficient ground 

connection complying with all applicable laws and 
regulations. 

 
Correct grounding is a legal requirement. If the appliance 
is not pre-fitted with a power cable and/ or plug, use only 
suitable cables and plugs capable of handling the power 
specified on the appliance's data plate and capable of 
resisting heat. The power cable should never reach a 
temperature 50 °C above ambient temperature at any 
point along its length.  
 
 
 
 
 
If the appliance is to be connected directly to mains 
terminals, fit a switch with minimum aperture of 3 mm 
between the contacts. Make sure that the switch is of 
sufficient capacity for the power specified on the 
appliance's data plate, and compliant with applicable 
regulations. The switch must not break the yellow-green 
earth wire. The socket or switch must be easily reachable 
with the cooking hob fully installed. 

Attention!

 The manufacturer declines all 

responsibility for damage or injury if the 
above instructions and normal safety 
precautions are not respected