Kaiser KCT 777 - Инструкция по эксплуатации - Страница 36

36 

EN 

Dual-circuit cut-off 

Depending on the design it is possible to operate dual 
circuit radiant heating elements with the Touch 
Control. 
 
When a multi-circuit heating element is put into 
operation, all heating circuits are switched- on at the 
same time.  
 
If only the inner heating circuits should be used, the 
outer heating circuit can be switched-off by means of 
the multi-circuit key or in individual steps. 
 
 



  By operating the multi-circuit key 

1

 the 

respective outer circuit of the assigned active 
cooking zone can be cut-off any time.  

 
 
An activated outer circuit will be indicated by an 
additional LED 

2

. 



 A renewed operation of the multi-circuit key will add 

the outer circuit(s) at any time.  
 
 
The assigned LED´s 

2 

glow again. 

Timer function 

 
The timer function is realized in two versions. 
 
 
Stand-alone timer 1 – 99 min: sound signal when the 
time is over «countdown tmer».  
This function is only available when the cooktop is not 
in operation, i.e. when there is no cooking, 
 
 
 
 
 
Cooking zone timer 1 – 99 min: sound signal when 
the time is over, four cooking zones can be 
programmed independently.

1 

2