Усилители Pioneer VSX-820 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Listening to your system
05
41
En
English
Français
Deutsch
Nederlands
Italiano
Español
Choosing the input signal
On this receiver, it is possible to switch the
input signals for the different inputs as
described below.
1
•
Press SIGNAL SEL to select the input
signal corresponding to the source
component.
When
DIGITAL
(
C1
/
O1
/
O2
) or
HDMI
(
H
) is
selected and the selected audio input is not
provided,
A
(analog) is automatically selected.
Each press cycles through the following:
•
A
– Selects the analog inputs.
•
DIGITAL
– Selects the digital input. The
coaxial 1 input is selected for
C1
, and the
optical 1 or 2 audio input is selected for
O1
or
O2
.
•
HDMI
– Selects an HDMI signal.
H
can be
selected for BD, DVD, TV/SAT or DVR/VCR
input. For other inputs,
HDMI
cannot be
selected.
2
When set to
DIGITAL
or
HDMI
,
2
lights when
a Dolby Digital signal is input, and
DTS
lights
when a DTS signal is input.
When the
HDMI
is selected, the
A
and
DIGITAL
indicators are off (see page 12).
Using the headphone
•
Insert the headphone into the PHONES
jack.
The sound is heard from the headphone and
no sound is heard from the speakers
connected to this receiver. The listening mode
when the sound is heard from the headphone
can be selected only from
STEREO
or
ALC
.
Note
1 • When digital input (optical or coaxial) is selected, this receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and
DTS (including DTS 96 kHz / 24 bit) digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital,
DTS, SACD (DSD 2 ch), PCM (32 kHz to 192 kHz sampling frequencies), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-
HD Master Audio and DVD Audio (including 192 kHz). With other digital signal formats, set to
A
(analog).
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make
the proper digital connections (page 23) and set the signal input to
C1
/
O1
/
O2
(
DIGITAL
).
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
2 When the
HDMI
option in
Setting the Audio options
on page 38 is set to
THRU
, the sound will be heard through your TV, not
from this receiver.
VSX-820_SYXCN_En.book 41 ページ
年４月
日 月曜日 午後
時
分
41
