Усилители Pioneer VSX-820 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Listening to your system
05
39
En
English
Français
Deutsch
Nederlands
Italiano
Español
Setting
What it does
Option(s)
EQ
(Acoustic Calibration
EQ)
Switches on/off the effect of Acoustic Calibration EQ.
ON
OFF
S.DELAY
(Sound Delay)
Some monitors have a slight delay when showing video, so
the soundtrack will be slightly out of sync with the picture.
By adding a bit of delay, you can adjust the sound to match
the presentation of the video.
0.0 to 9.0 (frames)
1 second = 25 frames
(PAL)
Default:
0.0
MIDNIGHT
a
Allows you to hear effective surround sound of movies at
low volumes.
M/L OFF
MIDNIGHT
LOUDNESS
a
Used to get good bass and treble from music sources at
low volumes.
LOUDNESS
S.RTV
b
(Sound Retriever)
When audio data is removed during the WMA/MP3
c
compression process, sound quality often suffers from an
uneven sound image. The Sound Retriever feature employs
new DSP technology that helps bring CD quality sound
back to compressed 2-channel audio by restoring sound
pressure and smoothing jagged artifacts left over after
compression.
OFF
ON
DUAL MONO
d
Specifies how dual mono encoded Dolby Digital
soundtracks should be played.
CH1
–
Channel 1 is heard only
CH2
–
Channel 2 is heard only
CH1 CH2
–
Both channels heard
from front speakers
DRC
(Dynamic Range
Control)
Adjusts the level of dynamic range for movie soundtracks
optimized for Dolby Digital, DTS, Dolby Digital Plus, Dolby
TrueHD, DTS-HD and DTS-HD Master Audio (you may
need to use this feature when listening to surround sound
at low volumes).
AUTO
e
MAX
MID
OFF
LFE ATT
(LFE Attenuate)
Some Dolby Digital and DTS audio sources include ultra-
low bass tones. Set the LFE attenuator as necessary to
prevent the ultra-low bass tones from distorting the sound
from the speakers.
The LFE is not limited when set to 0 dB, which is the
recommended value. When set to –15 dB, the LFE is
limited by the respective degree. When OFF is selected, no
sound is output from the LFE channel.
0
(0 dB)
5 (–5 dB)
10 (–10 dB)
15 (–15 dB)
20 (–20 dB)
** (OFF)
SACD G.
f
(SACD Gain)
Brings out detail in SACDs by maximizing the dynamic
range (during digital processing).
0
(dB)
+6 (dB)
VSX-820_SYXCN_En.book 39 ページ
年４月
日 月曜日 午後
時
分
