Усилители Pioneer VSX-420 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Making recordings
08
41
En
English
Français
Italiano
Español
Nederlands
Deutsch
Chapter 8:
Making recordings
Making an audio or a video
recording
You can make an audio or a video recording
from the built-in tuner, or from an audio or
video source connected to the receiver (such
as a CD player or TV).
1
Keep in mind you can’t make a digital
recording from an analog source or vice-versa,
so make sure the components you are
recording to/from are hooked up in the same
way (see
Connecting your equipment
on
page 13 for more on connections).
If you want to record a video source, you also
need to use the same type of connection for the
source as for the recorder. For example, you
can’t record a component hooked up to
composite video jacks with a recorder hooked
up to the component video outputs (see
page 20 for more on video connections).
1
Select the source you want to record.
Use the
MULTI CONTROL
buttons (
INPUT
SELECTOR
).
2
Select the input signal (if necessary).
Press
SIGNAL SEL
to select the analog input
signal corresponding to the source
component (see page 26 for more on this).
3
Prepare the source you want to record.
Tune to the radio station, load the CD, video,
DVD etc.
4
Prepare the recorder.
Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.
2
Refer to the instructions that came with the
recorder if you are unsure how to do this. Most
video recorders set the audio recording level
automatically—check the component’s
instruction manual if you’re unsure.
5
Start recording, then start playback of
the source component.
Note
1 If you are recording a video source, you need to use the same type of connection for the source as for the recorder. For example,
you can’t record a component hooked up to composite video jacks with a recorder hooked up to the component video outputs
(see
Connecting an HDD/DVD recorder, VCR and other video components
on page 20 for more on video connections).
BD
DVD
INPUT SELECT
SOURCE
SLEEP
TV
CONTROL
DVR
INPUT
CH
RECEIVER
MULTI IN
CD
CD-R
PORTABLE
TUNER SIGNAL SEL
RECEIVER
DTV/TV
2 The receiver’s volume, balance, tone (bass, treble, loudness), and surround effects have no effect on the recorded signal.
VSX-420_SY_En.book 41 ページ
年
月
９日 金曜日 午前９時
７分
