TCL 306 - Инструкция по эксплуатации - Страница 5

7

8

1.2  Getting started

Setting up

Inserting or removing the SIM/microSD card

1

   Insert the provided SIM pin into the hole.

2

   Pull out the SIM tray.

3

   Place the SIM card or microSD card into the tray slot and carefully close the 

SIM tray.



Single-SIM devices only

Dual-SIM devices only







You must insert your SIM card to make phone calls. You do not need to power off 

your phone before inserting or removing the SIM card as this phone supports hot 

swap.

 Your phone only supports nano-SIM cards. Do not attempt to insert other 

SIM types; otherwise this may cause damage to your phone.

Charging the battery

You are advised to fully charge the battery ( 

 ). Charging status is indicated by 

a percentage displayed on screen while the phone is powered off. The percentage 

increases as the phone is charged.

 To reduce power consumption and energy waste when the battery is fully 

charged, disconnect your charger from the plug; switch off Wi-Fi, GPS, 

Bluetooth or background-running applications when not in use; reduce the 

backlight time, etc.

Powering on your phone

Hold down the 

Power

 key until the phone powers on, unlock your phone (Swipe, 

PIN, Password, Pattern, Fingerprint or Face unlock) if necessary and confirm. The 

Home screen is displayed.
If you do not know your PIN code or forget it, contact your network operator. Be 

sure to keep your PIN code secure.

Powering off your phone

Press and hold the 

Power 

key until options appear, then select 

Power off

.