HP DL380 Gen10 (P24840-B21) - Инструкция по эксплуатации - Страница 152

Rated steady-state power

800 W at 200 VAC to 277 VAC
input

800 W at 380 VDC input

Maximum peak power

800 W at 200 VAC to 277 VAC
input

800 W at 380 VDC input

HPE 800W Flex Slot -48VDC Hot-plug Power Supply

Specification

Value

Input requirements

Rated input voltage

-40 VDC to -72 VDC

-48 VDC nominal input

Rated input current

26 A at -40 VDC input

19 A at -48 VDC input, nominal
input

12.4 A at -72 VDC input

Rated input power (W)

936 W at -40 VDC input

912 W at -48 VDC input,
nominal input

900 W at -72 VDC input

Rated input power (BTUs per
hour)

3194 at -40 VDC input

3112 at -48 VDC input,
nominal input

3071 at -72 VDC input

Power supply output

Rated steady-state power (W)

800 W at -40 VDC to -72 VDC

Maximum peak power (W)

800 W at -40 VDC to -72 VDC

WARNING:

To reduce the risk of electric shock or energy hazards:

• This equipment must be installed by trained service personnel, as defined by the NEC and IEC

60950-1, Second Edition, the standard for Safety of Information Technology Equipment.

• Connect the equipment to a reliably grounded Secondary circuit source. A Secondary circuit has no

direct connection to a Primary circuit and derives its power from a transformer, converter, or
equivalent isolation device.

• The branch circuit overcurrent protection must be rated 27 A.

152

 HPE 800W Flex Slot -48VDC Hot-plug Power Supply