Xiaomi Mi Robot Vacuum-Mop 2 RU White (BHR5958RU) - Инструкция по эксплуатации - Страница 16

13

Care & Maintenance

Brush 

* Weekly cleaning is recommended

1. Flip the vacuum-mop over and pinch the clips to remove the brush 

cover.

2. Lift the brush out of the vacuum-mop, then clean the brush bearings.

3. Use the included brush cleaning tool to remove any hairs tangled on 

the brush.

4. Reinsert the brush, then put the cover back on and press on it until the 

clips lock into place.

Brush Cover
Clips

Brush
Brush Bearings

Brush Cleaning Tool

Omnidirectional Wheel 

* Clean it as needed

1. Flip the vacuum-mop over and pull out the omnidirectional wheel.

2. Remove hair, dirt, and other debris from the wheel and axle.

3. Reinsert the wheel and press it firmly back into place.

Notes:

 · If too much hair is tangled in the brush, or if the hair is tightly tangled, do not forcibly pull 

on it, as this could damage the brush.

 · It is recommended to clean the brush weekly and replaced every 6 to 12 months.

Wheel

Axle

Notes:

 · A small screwdriver or other pry tool can be used to gently pop out and remove the wheel.

 · The wheel can be cleaned with water and reinstalled after drying.