Xiaomi Mi Robot Vacuum-Mop 2 RU White (BHR5958RU) - Инструкция по эксплуатации - Страница 15

12

Using the Mopping Function

1. Install the mop pad

Dampen the mop pad and wring out excess water. Slide the pad all the 

way into the slot of the water tank until it is securely in place.

2. Fill the water tank

Open the water tank lid, fill the tank with water, then securely close the lid.

Notes:

 · Do not add hot water to the water tank, as this may cause the tank to become deformed.

 · To avoid clogging, do not add any cleaning agents or disinfectants to the water tank.

3. Install the mopping assembly

To install the mopping assembly, slide it into the back of the vacuum-mop 

until it clicks into place.

4. Start mopping

Press the button        or use the Mi Home/Xiaomi Home app to start the 

cleanup. The vacuum-mop will automatically recognize the mopping 

assembly and begin mopping and dispensing water as needed.

5. Remove the mopping assembly 

After the vacuum-mop finishes cleaning and returns to the charging 

dock, press the side clips of the mopping assembly inward and pull to 

remove the assembly. 

Note:

When the vacuum-mop is charging or not in use, remove the mopping 

assembly. Pour out all remaining water in the tank, and clean the mop pad to prevent 

mildew or lingering odors.

Notes:

 · Only use the mopping mode when someone is at home. To prevent the vacuum from 

entering carpeted areas, objects may be used.

 · The mop pad should be cleaned after every 30 minutes of use to ensure adequate water 

flow and cleaning effectiveness.