Karcher NT 30/1 - Инструкция по эксплуатации - Страница 21

– 6

몇

WARNING

Safety equipment for preventing hazards 
must be serviced and maintained regularly. 
This means that the manufacturer's staff or 
persons trained by the manufacturer must 
check the equipment for proper functioning 
at least once a year, i.e. check for leaks, fil-
ter damage, etc.

ATTENTION

Risk of damage! Do not use detergents 
containing silicone to clean.

– No outside help is required for carrying 

out basic maintenance and cleaning.

– The appliance surface and the inside of 

the container should be cleaned regu-
larly using a damp cloth.



DANGER

Risk due to dust hazardous to health. Al-
ways use disposal clothing and P2 or higher 
breath-safe masks while carrying out main-
tenance tasks (such as changing filters).

Illustration 



Open filter door. 



Remove filter frame.



Take out the flat folded filter.



Dispose of the used flat-folded filter ac-
cording to the statutory provisions.



Remove the dirt that has accumulated 
on the pure air side.



Clean the filter frame and the support-
ing surface of the filter frame with a 
damp cloth.



Insert new flat-folded filter.
During placement, make sure that the 
flat fold filter rests against all sides.



Insert filter frame.



Close the filter door, it must lock into 
place.

Illustration 



Release and remove the suction head.



Pull out the fleece filter bag on the 
flange towards the top.



Tightly close the fleece filter bag with 
lock cap.



Dispose of the fleece filter bag accord-
ing to the local provisions.



Insert the new fleece filter bag.



Insert and lock the suction head.

Illustration 



Release and remove the suction head.



Put the disposal bag (option) over.



Tightly close the disposal bag (option) 
with cable tie underneath the opening.



Remove disposal bag (option).



Dispose of the dust bag (special acces-
sory) in accordance with statutory provi-
sions.



Insert the new disposal bag (option).



Pull disposal bag (option) over the con-
tainer.
Make sure that the marking line is situ-
ated within the container and both ven-
tilation holes are positioned at the back 
of the container.



Insert and lock the suction head.



Release and remove the suction head.



Clean the electrodes with a brush.



Insert and lock the suction head.



DANGER

First pull out the plug from the mains before 
carrying out any tasks on the machine. 

Note:

 In case of a failure (e.g. filter break-

age) the appliance must be turned off im-
mediately. The failure must be remedied 
before the appliance is put into operation 
again.



Check the receptacle and the fuse of 
the power supply.



Check the power cable, the power plug, 
the electrodes and possibly the recep-
tacle of the device.



Turn on the appliance.



Empty the container.

Exchanging the flat pleated filter

Exchange the fleece filter bag

Replace the disposal bag

Cleaning the electrodes

Troubleshooting

Suction turbine does not run

Suction turbine turns off

21

EN