Karcher NT 30/1 - Инструкция по эксплуатации - Страница 18

– 3

–

Please follow the safety regulations ap-
plicable to the materials that are to be 
treated. 

–

Press the parking brake to the steering 
roller for a secure footing. The device 
may move uncontrollably if the parking 
brake is open.

몇

WARNING

The flat pleated filter must always be in 
place while vacuuming.

몇

WARNING

Do not vacuum without the filter elements; 
otherwise, the suction motor can get dam-
aged and this can be hazardous to health 
on account of increased release of fine dust 
particles.

Only for appliances with built-in socket:

Static charge is deflected by providing 
earthing to the connection nozzles. This 
prevents the formation of sparks and cur-
rent shocks due to attachments (option) 
with electrical conductivity. 

– NT 30/1: The device is equipped with a 

fleece filter bag with a lock cap, order 
no. 2.889-154.0 (5 units).

– NT 40/1, NT 50/1: The device is 

equipped with a fleece filter bag with a 
lock cap, order no. 2.889-155.0 (5 units).

Note:

 You can use this appliance to vacu-

um all types of dust up to dust class L.

Note:

 The appliance is suited as industrial 

vacuum cleaner to take up dry, non-com-
bustible dusts with AGW values greater 
than or equal to 1 mg/m

3

.

– When vacuuming fine dust, a fleece fil-

ter or dust bag (option) can also be 
used.

Illustration 



Release and remove the suction head.



Insert the fleece filter bag.



Insert and lock the suction head.

Illustration 



Release and remove the suction head.



Insert the disposal bag (option).



Pull disposal bag (option) over the con-
tainer.
Make sure that the marking line is situ-
ated within the container and both ven-
tilation holes are positioned at the back 
of the container.



Insert and lock the suction head.

Applicable only for flat fold filter (Cellulose):

ATTENTION
Please note the following when switch-
ing from wet to dry vacuum cleaning:

If you vacuum dry dust while the filter ele-
ment is still wet the filter will become ob-
structed and may be damaged beyond re-
pair.



Replace wet filter with a dry one prior to 
use.



Change the filter according to instruc-
tions under the section "Maintenance 
and Care".

Note:

 For permanent wet vacuum cleaning 

it is advisable to use a PES flat pleated filter 
(see filter systems).



DANGER

No dusts hazardous to health should be 
sucked in during wet vacuuming. 

Illustration 



Remove the brush strips.



Install the rubber lips.

Note:

 The structured side of the rubber lips 

must point outwards.

Illustration 



Release and remove the suction head.



Pull out the fleece filter bag on the 
flange towards the top.



Tightly close the fleece filter bag with 
lock cap.

Start up

Anti-static system

Dry vacuum cleaning

Install fleece filter bag

Installing the dust disposal bag

Changeover from wet to dry vacuum 
cleaning

Wet vacuum cleaning

Inserting the rubber lips

Remove the fleece filter bag

18

EN