Karcher NT 30/1 - Инструкция по эксплуатации - Страница 20

– 5



Press the semi-automatic filter dedust-
ing key five times. The flat folded filter is 
automatically cleaned through an air jet 
(pulsating sound).

Illustration 



Power dedusting (especially with se-
vere soiling of the flat pleated filter): 
Cover the suction tube or the bender 
with your hand and press the semi-au-
tomatic filter dedusting key five times 
with the appliance switched on.



Press the semi-automatic filter dedust-
ing key five times.



Switch off the appliance at the rotating 
knob.



Pull out the mains plug.



Empty the container.



Vacuum and wipe the appliance inside 
and outside with a damp cloth.

NT 50/1 only:



Loosen the push handle lock and adjust 
the push handle.

Illustration 



Store the suction hose and the mains 
cable as shown in the illustration. 



Place the appliance in a dry room and 
secure it from unauthorized use.

몇

CAUTION

Risk of injury and damage! Observe the 
weight of the appliance when you transport 
it.



Remove the suction pipe with the floor 
nozzle from the holder. Hold the appli-
ance by the handle and at the suction 
pipe to transport it, not by the push han-
dle.



When transporting in vehicles, secure 
the appliance according to the guide-
lines from slipping and tipping over.

몇

CAUTION

Risk of injury and damage! Note the weight 
of the appliance in case of storage.

This appliance must only be stored in inte-
rior rooms.



DANGER

First pull out the plug from the mains before 
carrying out any tasks on the machine. 

Dust extracting machines are safeguards 
for the prevention or elimination of hazards 
defined in the regulations of BGV A1.
– In order to carry out maintenance work, 

the user must disassemble, clean and 
service the unit, in so far as this is pos-
sible without endangering maintenance 
personnel and other persons. Suitable 
precautions include decontamination 
before the unit is disassembled. Pre-
cautions must be taken for local filtered 
forced air ventilation at the place where 
the unit is disassembled, the cleaning of 
the maintenance surface and suitable 
protection of the personnel.

– The outside of the unit should be 

cleaned thoroughly and any harmful 
substances removed. Alternatively, a 
sealed coating may be applied before 
the unit is removed from the danger ar-
ea. All unit parts are to be considered 
contaminated when they are removed 
from the danger area. To avoid distribu-
tion of the dust, you must take the ap-
propriate measures.

– In the framework of maintenance and 

repair work all contaminated objects 
that cannot be cleaned satisfactorily 
must be disposed of. Such objects must 
be disposed of in impermeable bags in 
accordance with the valid provisions for 
the disposal of such waste.

Turn off the appliance

After each operation

Fold the push handle in/out

Storing the Appliance

Transport

Storage

Care and maintenance

20

EN